Phantom 4 Shaky Jittery Video

fansd1d40f34

I've seen numerous posts on this over the lifespan of the P4 but don't know if anyone has discovered a resolution.

I experience shaky or jittery video (10 second video link included in this post) often especially when the camera is facing to the left or right. This is not a filter issue as far as slowing down the shutter speed.

Is the probable issue the absorbers (or whatever they are called) within the shell?

Or, if the entire camera/gimbal were replaced is that a probable resolution? That's a pricy resolution but, if my video is crappy because of the jitter then it may be worth it.

Or, the fact I change filters depending on the lighting and don't recalibrate the camera/gimbal with each change (could the slight difference in the filters weight be the issue if recalibration is not done)?

Thanks

Vendex

What is your memory card type, speed, parameters? About filters, I don't think you need calibration of the gimbal if you are using geniune dji filters.

fansd1d40f34

Vendex Posted at 2017-11-6 06:32
What is your memory card type, speed, parameters? About filters, I don't think you need calibration of the gimbal if you are using geniune dji filters.

I use Polar Pro filters.

SD card is SanDisk Ultra Plus 64 gb

Vendex

fansd1d40f34 Posted at 2017-11-6 06:43
I use Polar Pro filters.

SD card is SanDisk Ultra Plus 64 gb

Have you tried to gently put the filter after initialization of the gimbal when you turn it on? The memory card is good.

fansd1d40f34

Vendex Posted at 2017-11-6 07:59
Have you tried to gently put the filter after initialization of the gimbal when you turn it on? The memory card is good.

I put the filter on the camera (always gently) when the P4 is powered off.

DJI Elektra · 2017-11-11

fansd1d40f34 Posted at 2017-11-6 08:04
I put the filter on the camera (always gently) when the P4 is powered off.

How about the environment you fly your drone? What is the firmware of your P4? Please change an environment without wind and calibrate your gimbal before flight. Also, you can try to gentlely rotate the yaw-axis and the part above the camera. Maybe some forgien matter is inside it and affect the performance.