Controller upgrade to HDMI ?
1673 5 2017-11-7
Uploading and Loding Picture ...(0/1)
o(^-^)o
davawt
lvl.3
Flight distance : 4885 ft
  • >>>
United Kingdom
Offline

hi there,
Can anybody tell me about installing a HDMI unit to phantom 4 Pro Controller, this is a UK VERSION so only supplied with USB output.
I have just bought a set of DJI GOGGLES and would like to use them on the p4p as a viewer device for others.
Can it be done?
Thank you for any feedback,
bye
davawt
2017-11-7
Use props
FredAstra
Second Officer
Flight distance : 595577 ft
United Kingdom
Offline

I added the HDMI module to my basic P4 about a year ago. It works Ok with my Headplay headset.  Ken Heron (my hero) has just posted a good video which discusses a common fault with the module.  This video would also show how to remove and connect the modules.  So should be OK for doing the upgrade. Assuming it is the same for the P4p ?   
2017-11-7
Use props
Kneepuck
Second Officer
Flight distance : 275105 ft
United States
Offline

FredAstra Posted at 2017-11-7 14:06
I added the HDMI module to my basic P4 about a year ago. It works Ok with my Headplay headset.  Ken Heron (my hero) has just posted a good video which discusses a common fault with the module.  This video would also show how to remove and connect the modules.  So should be OK for doing the upgrade. Assuming it is the same for the P4p ? https://www.youtube.com/watch?v=5UA6AGp_bhk

That video was excellent.  I have not used my Hdmi module in over a year because the app would not connect to the rc.  I did  the fix to the solder connections and now it works.  Thanks for the post.
2017-11-7
Use props
davawt
lvl.3
Flight distance : 4885 ft
  • >>>
United Kingdom
Offline

FredAstra Posted at 2017-11-7 14:06
I added the HDMI module to my basic P4 about a year ago. It works Ok with my Headplay headset.  Ken Heron (my hero) has just posted a good video which discusses a common fault with the module.  This video would also show how to remove and connect the modules.  So should be OK for doing the upgrade. Assuming it is the same for the P4p ? https://www.youtube.com/watch?v=5UA6AGp_bhk

Thanks for the great video,
I think I will have a word with DJI and then buy one.
bye
davawt
2017-11-8
Use props
DJI Susan
Administrator
Offline

The HDMI Module is compatible with P4 series and P3P/P3A. The below video might be helpful:

2017-11-8
Use props
davawt
lvl.3
Flight distance : 4885 ft
  • >>>
United Kingdom
Offline

DJI Susan Posted at 2017-11-8 01:08
The HDMI Module is compatible with P4 series and P3P/P3A. The below video might be helpful:

https://youtu.be/fBt7FiH0mII

Hi Susan,
Thank you for information and the excellent video, I will be trying the video out shortly after buying the HDMI MODULE Unit, very soon,
Thanks again for your help Susan, be back in touch when I am up and running,
Bye
davawt
2017-11-8
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules