Please select Into the mobile phone version | Continue to access the computer ver.
Phantom3 Advanced ESC error
123456Next >
5856 219 2017-11-11
Uploading and Loding Picture ...(0/1)
o(^-^)o
TomWolves
Second Officer
Flight distance : 110549 ft
United States
Offline

After I updated to FW v.1.11.20 I now get a ESC error message on my Go-App, never had this happen until I updated everything. They are saying there is 'Firmware v1.11.30" update for ESC error. I can not find this v1.11.30 any place on the DJI sight. Could someone give me some insight to this please.
Thank you
TW
2017-11-11
Use props
DJI Susan
Administrator

Offline

Just to verify, the issue only appears after the latest update, right? I have PMed you the download link and try again. Any questions, feel free to contact us.
2017-11-12
Use props
TomWolves
Second Officer
Flight distance : 110549 ft
United States
Offline

DJI Susan Posted at 2017-11-12 23:01
Just to verify, the issue only appears after the latest update, right? I have PMed you the download link and try again. Any questions, feel free to contact us.

Thank you Susan, received the FW update 1.11.30 this morning. Installed it and I didn't get the error message. Hopefully it worked. I know my P3ADV was warmed up already from the update. Again thank you for your help, I appreciate it.
Tom
2017-11-13
Use props
DJI Susan
Administrator

Offline

TomWolves Posted at 2017-11-13 21:00
Thank you Susan, received the FW update 1.11.30 this morning. Installed it and I didn't get the error message. Hopefully it worked. I know my P3ADV was warmed up already from the update. Again thank you for your help, I appreciate it.
Tom

You are welcome. Wish you have a good time on flying the drone.
2017-11-15
Use props
Resha
lvl.1

Indonesia
Offline

hi susan, i have phantom 3 pro that esc errors too, my phantom previously been fine. Can you help me, what should I do? is it upgrading fimeware?
2017-11-15
Use props
Resha
lvl.1

Indonesia
Offline

DJI Susan Posted at 2017-11-15 01:22
You are welcome. Wish you have a good time on flying the drone.

hi susan, i have phantom 3 pro that esc errors too, my phantom previously been fine. Can you help me, what should I do? is it upgrading fimeware?
2017-11-15
Use props
DJI Diana
Administrator

Offline

Resha Posted at 2017-11-15 03:42
hi susan, i have phantom 3 pro that esc errors too, my phantom previously been fine. Can you help me, what should I do? is it upgrading fimeware?

Hi Resha, I've replied your own thread, please check it.
2017-11-15
Use props
vironxatzi
New
Flight distance : 22150 ft

Greece
Offline

TomWolves Posted at 2017-11-13 21:00
Thank you Susan, received the FW update 1.11.30 this morning. Installed it and I didn't get the error message. Hopefully it worked. I know my P3ADV was warmed up already from the update. Again thank you for your help, I appreciate it.
Tom

Hi where you find this update ?
2017-11-17
Use props
DJI Susan
Administrator

Offline

vironxatzi Posted at 2017-11-17 06:25
Hi where you find this update ?

Sir, what's your main issue? Be more specific of this, I'm glad to help.
2017-11-20
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

Hi, I have same issue but I still not update new firmware version. can you send me download link and how to update both RC and Drone...
2017-12-10
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

DJI Susan Posted at 2017-11-12 23:01
Just to verify, the issue only appears after the latest update, right? I have PMed you the download link and try again. Any questions, feel free to contact us.

Hi, I have same issue but I still not update new firmware version. So can you also send me download link and how to update both RC and Drone...
2017-12-10
Use props
DJI Susan
Administrator

Offline

fansdbde2298 Posted at 2017-12-10 21:26
Hi, I have same issue but I still not update new firmware version. So can you also send me download link and how to update both RC and Drone...

Hey there, the firmware only fix the ESC issue after upgrading to the latest aircraft firmware. I've PMed you the download link, please have a try.
2017-12-11
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

DJI Susan Posted at 2017-12-11 23:00
Hey there, the firmware only fix the ESC issue after upgrading to the latest aircraft firmware. I've PMed you the download link, please have a try.

Hi, Thanks for PM.Is it for Phantom3 Advanced ??? I need for Phantom3 Advanced. can you please let me know how to update it. do you have video link...
2017-12-13
Use props
DJI Susan
Administrator

Offline

fansdbde2298 Posted at 2017-12-13 00:58
Hi, Thanks for PM.Is it for Phantom3 Advanced ??? I need for Phantom3 Advanced. can you please let me know how to update it. do you have video link...

Thanks for clarification. The bin file of P3A begins with P3S. Here is the tutorial video of upgrading firmware, please check it and try later.

2017-12-13
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

DJI Susan Posted at 2017-12-13 19:39
Thanks for clarification. The bin file of P3A begins with P3S. Here is the tutorial video of upgrading firmware, please check it and try later.

https://youtu.be/EPuhdZ4l18Q

Let me upgrade it.
2017-12-13
Use props
jarda
lvl.2
Flight distance : 148056 ft
  • >>>
Czech Republic
Offline


hi susan my p3P reports esc error thank you for your help
2017-12-13
Use props
jarda
lvl.2
Flight distance : 148056 ft
  • >>>
Czech Republic
Offline

hi susan my p3P reports esc error thank you for your help
2017-12-13
Use props
jarda
lvl.2
Flight distance : 148056 ft
  • >>>
Czech Republic
Offline

jarda Posted at 2017-12-13 23:05
hi susan my p3P reports esc error thank you for your help

hello Susan file I downloaded failed. camera rattled and permanently red dron esc
2017-12-14
Use props
DJI Susan
Administrator

Offline

jarda Posted at 2017-12-14 00:12
hello Susan file I downloaded failed. camera rattled and permanently red dron esc

Jarda, I've PM you the download link, please check wheher you have received it .
2017-12-14
Use props
jarda
lvl.2
Flight distance : 148056 ft
  • >>>
Czech Republic
Offline

DJI Susan Posted at 2017-12-14 04:40
Jarda, I've PM you the download link, please check wheher you have received it .

hello the link used by the dron did not take a still write esc and a beeping alarm
2017-12-14
Use props
DJI Susan
Administrator

Offline

jarda Posted at 2017-12-14 14:17
hello the link used by the dron did not take a still write esc and a beeping alarm

Jarda, the firmware only fix the ESC error which appeared after the firmware update. If not, please send it in for fully diagnosis and repair: https://www.dji.com/support
2017-12-15
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

here is screenshot so remote says 1.9.2 and 1.11.20 . I still not update firmware to 1.11.30 for ESC. is this version fine to update 1.11.30 ?
2017-12-17
Use props
DJI Susan
Administrator

Offline

fansdbde2298 Posted at 2017-12-17 08:34
here is screenshot so remote says 1.9.2 and 1.11.20 . I still not update firmware to 1.11.30 for ESC. is this version fine to update 1.11.30 ?[view_image]

Sir, is there any issue of your drone? The V1.11.30 only fix the ESC error. If everything of your drone work well, there is no need to update, please kindly note and confirm, thanks!
2017-12-18
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

Hi, thanks for feedback. Sometime its give ESC error. Also I purchase new battery before a days. Is battery should upgrade?
2017-12-18
Use props
fansdbde2298
lvl.1
Flight distance : 991 ft

India
Offline

Actually firmware update message coming on screen when it warming up
2017-12-18
Use props
fanse48abd34
lvl.1
France
Offline

Hi , i have the same error, can you send me the link for P3 professional (sorry for my bad english) Thank
2017-12-30
Use props
TiagoMoreira
lvl.1

Brazil
Offline

Good morning, After I upgraded my Phantom 3 Advance it appeared an ESC error, how do I solve it?
2018-1-16
Use props
TiagoMoreira
lvl.1

Brazil
Offline

Where the new version comes down, the site only has the old one
2018-1-16
Use props
fans2a8d5bf4
lvl.2
United States
Offline

Hi dji Susan, I am having this same esc error. First time I have ever seen this, I updated to new firmware and now I have the esc error. Can you help me? Thanks!
2018-1-16
Use props
TiagoMoreira
lvl.1

Brazil
Offline

Did you get the new version v1.11.30? Can you send it to me?
2018-1-16
Use props
fans620c2d26
lvl.3
Flight distance : 84850 ft
United States
Offline

I need the new version v.11.30 have esc error i have a p3p
2018-1-17
Use props
jarda
lvl.2
Flight distance : 148056 ft
  • >>>
Czech Republic
Offline

fans620c2d26 Posted at 2018-1-17 09:46
I need the new version v.11.30 have esc error i have a p3p

hello I had version 1.11.20 with esc, the fix on 1.11.30 is not finished and it is currently 1.11.20+ and still esc. please help
2018-1-17
Use props
Leontijevic
lvl.2
Flight distance : 1030 ft

Serbia
Offline

Hi Susan I have phantom 3 pro  and I have a problem with esc error  if I could get a new  firmware and some short explanation of how it is settled. thank you
2018-1-18
Use props
fansd80a2032
lvl.1
Flight distance : 156925 ft
United States
Offline

Can you please tell me what firmware do I have to download to get the error message off concerning the ESC or tell me what can I do thank you very much
2018-1-24
Use props
fansc4374161
lvl.1
Brazil
Offline

DJI Susan Posted at 2017-11-15 01:22
You are welcome. Wish you have a good time on flying the drone.

Hi Susan, where can i get this update?
My phantom 3 Advanced are getting esc error just after a install new firmware p3s 01.11.0020. I already reinstall and still the same error.
Thanks.
Screenshot_20180124-083434.png
2018-1-24
Use props
fansc4374161
lvl.1
Brazil
Offline

Hi Susan, where can i get this update?
My phantom 3 Advanced are getting esc error just after a install new firmware p3s 01.11.0020. I already reinstall and still the same error.
Thanks.
Screenshot_20180124-083434.png
2018-1-24
Use props
Anderson_Araujo
lvl.1
Flight distance : 121314 ft
Brazil
Offline

Hi All

Anyone can share with me the firmware (v1.11.30) ?
My P3A is showing the message: "ESC STATUS ERROR"

Please?



2018-1-25
Use props
DJI Susan
Administrator

Offline

TiagoMoreira Posted at 2018-1-16 03:49
Good morning, After I upgraded my Phantom 3 Advance it appeared an ESC error, how do I solve it?

Tiago, I'm sorry for the late response. I just checked your message in PM, and afraid that this may not be figured out remotely. Please kindly start a case and send it in at your earliest convenience: https://www.dji.com/support
2018-1-29
Use props
DJI Susan
Administrator

Offline

Leontijevic Posted at 2018-1-18 09:23
Hi Susan I have phantom 3 pro  and I have a problem with esc error  if I could get a new  firmware and some short explanation of how it is settled. thank you

Leontijevic, the latest version of P3P is V01.11.0030. If the issue remains after upgrading to this version, I'm sorry you may consider to send it in: https://www.dji.com/support
2018-1-29
Use props
DJI Susan
Administrator

Offline

fansc4374161 Posted at 2018-1-24 06:25
Hi Susan, where can i get this update?
My phantom 3 Advanced are getting esc error just after a install new firmware p3s 01.11.0020. I already reinstall and still the same error.
Thanks.

I've sent you the download link in PM, please check later.
2018-1-29
Use props
123456Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules