Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal gyroscope error
2387 2 2017-11-12
Uploading and Loding Picture ...(0/1)
o(^-^)o
nicolo' asahi
lvl.1

Italy
Offline

hi

I bought the drone dji mavic pro refurbished about 10 days ago, today I tried the first settings and i tried to connect the drone to the controller, once the operation was completed and before leaving the first flight came these 2 following messages "Gimbal gyroscope error "," aircraft engine overloaded, check wheter gimbs clamp is removed ", the gimbal was free from the supports I had previously removed.
2017-11-12
Use props
QuadKid
Captain
Flight distance : 482349 ft
United States
Offline

Make sure the Gimbal platform is not stuck under one of the small tabs underneath. If that isn't the problem I would try Calibrating the IMU's, VPS, and then Calibrate the Gimbal. Shut everything of and restart, hopefully this will cure it.
2017-11-12
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Please try to restart the drone a couple of times, and try to refresh the firmware. If the issue persists, please send it back to repair. Please contact support.nl@dji.com if there is a need.
2017-11-12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules