Please select Into the mobile phone version | Continue to access the computer ver.
What does this RC LED code mean
2101 4 2017-11-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
geohei
lvl.4
Flight distance : 663061 ft
Luxembourg
Offline

Trying to reset my RC controller (I still didn't manage), I noticed that when ...

1. I leave the RC off.
2. I press C1 + C2 + shutter (all the way down) at the same time

... I see the white LEDs like that ...

LED 1 (most left) : on steady
LED 2 : on steady
LED 3 : flashing
LED 4 : off

What does this mean?

On top, while pressing the 3 buttons above simulationusly and switch the RC on, additionally the power LED goes light green (not the ususal dark green).

What does this mean?

Thanks,

2017-11-13
Use props
DJI Susan
Administrator

Offline

The first LED is the Status LED to display the RC's system status, and the last 4 LEDs show the battery level of RC, please kindly note. You will get the upgrade message if the press the 3 buttons at the same time.
RC.png
2017-11-13
Use props
geohei
lvl.4
Flight distance : 663061 ft
Luxembourg
Offline

DJI Susan ... thanks for your posting, but I am fully aware of the commonly known meaning of the Battery Level & Status LEDs. My posting doesn't ask for any clarification about these LEDs as described in your explanations.

I'm talking about undocumented behaviour (please read the first posting again).

Bottom line is ... I need to know that the controller is in faulty before I return it. Therefore I would like to try 2 things first before returning it.

1. Reset the controller. How can I do this? Please provide clear instructions which work for firware 01.04.01.00.

2. Re-install firmware again over the existing firmware (01.04.01.00 is presently on). How can I do this? Please provide clear instructions.

Again, only clear instructions or links help.

Thanks,

Besides this, you write "You will get the upgrade message if the press the 3 buttons at the same time."

What is an upgrade message and where do I get this (on the tablet)?

Please state clearly what you mean.
2017-11-14
Use props
sincabeza
Second Officer
Flight distance : 1394465 ft
  • >>>
Ukraine
Offline

"You will get the upgrade message if the press the 3 buttons at the same time."

I just got blue light on RC and all the time beeping )
2017-11-14
Use props
geohei
lvl.4
Flight distance : 663061 ft
Luxembourg
Offline

sincabeza Posted at 2017-11-14 22:30
"You will get the upgrade message if the press the 3 buttons at the same time."

I just got blue light on RC and all the time beeping )

This is the mode to connect/link the RC to the drone.
Same here with my equipment.

Besides this ... I sent my RC back and got a new one in return.
All works now.

I guess the RC LED codes described in the OP were just completely erroneous codes due faulty RC.
2017-11-23
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules