Hi all,

A little post for great help, I hope

I have a P3 Pro, after a recent crash, camera was broken...
I found a P3 Advanced camera, absolutly new.

Like I read, the cameras could be swap between the P3P and the P3A. I should just have to install the P3A firmware in my P3P.

Camera installed, SD card formated and the file put in : P3S_FW_V01.11.0020.bin
RC controller is in the last firmware too, upgraded by the DJI GO App.

The firmware installation failed in a long beep sound....
I take the 2 differents logs in the SD Card, but I don't know how find the raison why the installation failed...

For info :
- The drone could fly without any problem. DJI GO do not see any problem too.
- The only think is sometimes DJI still recognize my drone like a professionnal ... But generally like an Advanced now.
- Every time, the camera return on tablet is very bad, only few images, huge lag and bug.

The 2 next post will be the LOG from SD Card.

I hope Phantom Geeks will help me.
Thank you.
Loïc.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Success.

========== 2017.10.25 14:42:50 =====================
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2017.10.25 15:39:36 =====================
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2017.10.25 16:06:15 =====================
Packet: P3S_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:22 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2017.11.15 15:43:49 =====================
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:21 remo-con disconnect======
Packet: P3S_FW_V01.11.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

LUIS401 Posted at 2017-11-16 00:35
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.10.0090.bin
Upgrading ...

[00013079]========== remo-con disconnect. boot(15) ============
[00013424]Packet [C:\P3S_FW_V01.10.0090.bin] detected, card sn [0x2857835f].
[00013461]Packet upgrade start...

[00013505]Packet checking...
[00013545]Packet vlink 01.10.0090 <-> 01.10.0090.
[00013621]Done.

[00013659]Version checking[1]...
[00013739][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013822][03 06][00] v2.4.15.5 -> v2.4.20.28 need upgrade.
[00013868][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.
[00014002][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014139][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014178][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014261][12 00][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014358][12 01][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014441][12 02][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014539][12 03][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00014581][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014686][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00014806][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00014877][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014919][01 00][00] v1.23.4920 -> v1.25.5432 need upgrade
[00014958][01 01][00] v1.23.4920 -> v1.25.5432 need upgrade
[00015017][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00015059]Done.

[00017096]Waiting for user confirm...
[00027138]Timeout, start upgrade automatically.

[00027215]Firmware upgrading[1]...
[00040296][01 00] Firmware upgrade start...
[00012452]========== remo-con disconnect. boot(15) ============
[00012497]Packet [C:\P3S_FW_V01.10.0090.bin] detected, card sn [0x2857835f].
[00012543]Packet upgrade start...

[00012586]Packet checking...
[00012631]Packet vlink 01.10.0090 <-> 01.10.0090.
[00012700]Done.

[00012737]Version checking[1]...
[00012806][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012887][03 06][00] v2.4.15.5 -> v2.4.20.28 need upgrade.
[00012932][04 00][00] v1.44.0.0 -> v1.48.0.0 need upgrade.
[00013047][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013166][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013314][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013399][12 00][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013506][12 01][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013591][12 02][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00013685][12 03][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00018233][15 00][00] v1.1.2.0 -> v1.1.2.0
[00018315][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00018435][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00018490][19 00][00] v1.0.8.96 -> v1.0.8.96
[00018534][01 00][00] v1.25.5432 -> v1.25.5432
[00018576][01 01][00] v1.23.4920 -> v1.25.5432 need upgrade
[00018631][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.
[00018671]Done.

[00020712]Waiting for user confirm...
[00030753]Timeout, start upgrade automatically.

[00030837]Firmware upgrading[1]...
[00031003][01 01] Firmware upgrade start...
[00061329][01 01] Firmware upgrade finished successfully.
[00061388][12 00] Firmware upgrade start...
[00121196][12 00] Firmware upgrade finished successfully.
[00121258][12 01] Firmware upgrade start...
[00184182][12 01] Firmware upgrade finished successfully.
[00184246][12 02] Firmware upgrade start...
[00245647][12 02] Firmware upgrade finished successfully.
[00245711][12 03] Firmware upgrade start...
[00308476][12 03] Firmware upgrade finished successfully.
[00308544][17 00] Firmware upgrade start...
[00392073][17 00] Firmware upgrade finished successfully.
[00392136][17 01] Firmware upgrade start...
[00454615][17 01] Firmware upgrade finished successfully.
[00454890][03 06] Firmware upgrade start...
[00808729][03 06] Firmware upgrade finished successfully.
[00808799][09 00] Firmware upgrade start...
[00860845][09 00] Firmware upgrade finished successfully.
[00860919][04 00] Firmware upgrade start...
[00919039][04 00] Firmware upgrade finished successfully.
[00919084]Done.

[00919123]Version checking[2]...
[00919209][03 05][00] v34.2.0.9 -> v34.2.0.9
[00919329][03 06][05] v2.4.20.28 -> v2.4.20.28
[00919507][04 00][05] v1.48.0.0 -> v1.48.0.0
[00919632][11 00][00] v1.8.0.0 -> v1.8.0.0
[00919755][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00919799][11 01][00] v1.8.0.0 -> v2.0.0.33
[00919904][12 00][05] v1.11.0.0 -> v1.11.0.0
[00920003][12 01][05] v1.11.0.0 -> v1.11.0.0
[00920102][12 02][05] v1.11.0.0 -> v1.11.0.0
[00920202][12 03][05] v1.11.0.0 -> v1.11.0.0
[00920248][15 00][00] v1.1.2.0 -> v1.1.2.0
[00920339][17 00][05] v1.1.1.7 -> v1.1.1.7
[00920480][17 01][05] v1.0.2.7 -> v1.0.2.7
[00920543][19 00][00] v1.0.8.96 -> v1.0.8.96
[00920586][01 00][00] v1.25.5432 -> v1.25.5432
[00920637][01 01][05] v1.25.5432 -> v1.25.5432
[00920703][09 00][05] v3.0.0.10 -> v3.0.0.10
[00920745]Packet upgrade finish successfully.



[00012211]========== remo-con disconnect. boot(15) ============
[00012254]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00012299]Packet upgrade start...

[00012343]Packet checking...
[00012411]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012453]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00012494]Done.

[00012533]Version checking[1]...
[00012606][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00012686][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012742][04 00][00] v1.48.0.0 -> v1.48.0.0
[00012865][11 00][00] v1.8.0.0 -> v1.8.0.0
[00012985][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013028][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013146][12 00][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00013236][12 01][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00013335][12 02][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00013413][12 03][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00017961][15 00][00] v1.1.2.0 -> v1.1.2.0
[00018054][17 00][00] v1.1.1.7 -> v1.1.1.7
[00018195][17 01][00] v1.0.2.7 -> v1.0.2.7
[00018264][19 00][00] v1.0.8.96 -> v1.0.8.96
[00018307][01 00][00] v1.25.5432 -> v1.25.5432
[00018347][01 01][00] v1.25.5432 -> v1.25.5432
[00018545][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
[00018585]Done.

[00020631]Waiting for user confirm...
[00030677]Timeout, start upgrade automatically.

[00030766]Firmware upgrading[1]...
[00030828][12 00] Firmware upgrade start...
[00088713][12 00] Firmware upgrade finished successfully.
[00088775][12 01] Firmware upgrade start...
[00155929][12 01] Firmware upgrade finished successfully.
[00155987][12 02] Firmware upgrade start...
[00215473][12 02] Firmware upgrade finished successfully.
[00215553][12 03] Firmware upgrade start...
[00272997][12 03] Firmware upgrade finished successfully.
[00273283][03 06] Firmware upgrade start...
[00640939][03 06] Firmware upgrade finished successfully.
[00641021][09 00] Firmware upgrade start...
[00693184][09 00] Firmware upgrade finished successfully.
[00693229]Done.

[00693271]Version checking[2]...
[00693351][03 06][05] v2.4.20.50 -> v2.4.20.50
[00693436][03 05][00] v34.2.0.9 -> v34.2.0.9
[00693489][04 00][00] v1.48.0.0 -> v1.48.0.0
[00693611][11 00][00] v1.8.0.0 -> v1.8.0.0
[00693753][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00693795][11 01][00] v1.8.0.0 -> v2.0.0.33
[00693924][12 00][05] v1.12.0.0 -> v1.12.0.0
[00694026][12 01][05] v1.12.0.0 -> v1.12.0.0
[00694136][12 02][05] v1.12.0.0 -> v1.12.0.0
[00694236][12 03][05] v1.12.0.0 -> v1.12.0.0
[00694280][15 00][00] v1.1.2.0 -> v1.1.2.0
[00694381][17 00][00] v1.1.1.7 -> v1.1.1.7
[00694505][17 01][00] v1.0.2.7 -> v1.0.2.7
[00694565][19 00][00] v1.0.8.96 -> v1.0.8.96
[00694608][01 00][00] v1.25.5432 -> v1.25.5432
[00694653][01 01][00] v1.25.5432 -> v1.25.5432
[00694705][09 00][05] v4.1.0.0 -> v4.1.0.0
[00694749]Packet upgrade finish successfully.



[00012098]========== 2017.10.25 14:42:50. boot(15) ============
[00012141]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00012183]Packet upgrade start...

[00012229]Packet checking...
[00012282]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012438]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00012484]Done.

[00012527]Version checking[1]...
[00012626][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012746][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012795][04 00][00] v1.48.0.0 -> v1.48.0.0
[00012926][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013045][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013089][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013207][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013313][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013412][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013516][12 03][00] v1.12.0.0 -> v1.12.0.0
[00013608][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013709][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013834][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013905][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013949][01 00][00] v1.25.5432 -> v1.25.5432
[00013993][01 01][00] v1.25.5432 -> v1.25.5432
[00014067][09 00][00] v4.1.0.0 -> v4.1.0.0
[00014110]Packet upgrade cancelled at version checking.



[00012112]========== 2017.10.25 15:39:36. boot(15) ============
[00012155]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00012200]Packet upgrade start...

[00012249]Packet checking...
[00012301]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012346]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00012389]Done.

[00012434]Version checking[1]...
[00012520][03 06][00] v2.4.20.50 -> v2.4.20.50
[00012599][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012654][04 00][00] v1.48.0.0 -> v1.48.0.0
[00012780][11 00][00] v1.8.0.0 -> v1.8.0.0
[00012899][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00012945][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013025][12 00][00] v1.12.0.0 -> v1.12.0.0
[00013103][12 01][00] v1.12.0.0 -> v1.12.0.0
[00013204][12 02][00] v1.12.0.0 -> v1.12.0.0
[00013284][12 03][00] v1.12.0.0 -> v1.12.0.0
[00017831][15 00][00] v1.1.2.0 -> v1.1.2.0
[00017908][17 00][00] v1.1.1.7 -> v1.1.1.7
[00018023][17 01][00] v1.0.2.7 -> v1.0.2.7
[00018084][19 00][00] v1.0.8.96 -> v1.0.8.96
[00018225][01 00][00] v1.25.5432 -> v1.25.5432
[00018273][01 01][00] v1.25.5432 -> v1.25.5432
[00018344][09 00][00] v4.1.0.0 -> v4.1.0.0
[00018391]Packet upgrade cancelled at version checking.



[00012476]========== 2017.10.25 16:06:15. boot(15) ============
[00012518]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00012562]Packet upgrade start...

[00012612]Packet checking...
[00012658]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012702]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00012780]Done.

[00012824]Version checking[1]...
[00012911][03 06][00] v2.4.20.50 -> v2.4.20.50
[00013011][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013064][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015694][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015835][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015883][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015978][12 00][00] v1.12.0.0 -> v1.12.0.0
[00016058][12 01][00] v1.12.0.0 -> v1.12.0.0
[00016183][12 02][00] v1.12.0.0 -> v1.12.0.0
[00016283][12 03][00] v1.12.0.0 -> v1.12.0.0
[00016336][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016446][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016578][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016640][19 00][00] v1.0.8.96 -> v1.0.8.96
[00016689][01 00][00] v1.25.5432 -> v1.25.5432
[00016734][01 01][00] v1.25.5432 -> v1.25.5432
[00016795][09 00][00] v4.1.0.0 -> v4.1.0.0
[00016844]Packet upgrade cancelled at version checking.



[00022809]========== remo-con disconnect. boot(15) ============
[00022886]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00022930]Packet upgrade start...

[00022980]Packet checking...
[00023029]Packet vlink 01.11.0020 <-> 01.11.0020.
[00023076]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00023118]Done.

[00023163]Version checking[1]...
[00035706][03 06][00] device not detected.
[00048252][03 05][00] device not detected.
[00048307][04 00][00] v1.48.0.0 -> v1.48.0.0
[00060862][11 00][00] device not detected.
[00073540][11 01][00] device not detected.
[00086084][12 00][00] device not detected.
[00098630][12 01][00] device not detected.
[00111176][12 02][00] device not detected.
[00123724][12 03][00] device not detected.
[00146270][15 00][00] device not detected.
[00158816][17 00][00] device not detected.
[00171364][17 01][00] device not detected.
[00183910][19 00][00] device not detected.
[00183955][01 00][00] v1.25.5432 -> v1.25.5432
[00184003][01 01][00] v1.25.5432 -> v1.25.5432
[00196594][09 00][00] device not detected.
[00196648]Packet upgrade failed at version checking.



[00022214]========== remo-con disconnect. boot(15) ============
[00022258]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00022300]Packet upgrade start...

[00022348]Packet checking...
[00022395]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022437]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00022481]Done.

[00022529]Version checking[1]...
[00035077][03 06][00] device not detected.
[00047618][03 05][00] device not detected.
[00047674][04 00][00] v1.48.0.0 -> v1.48.0.0
[00060216][11 00][00] device not detected.
[00072761][11 01][00] device not detected.
[00085302][12 00][00] device not detected.
[00097854][12 01][00] device not detected.
[00110396][12 02][00] device not detected.
[00122940][12 03][00] device not detected.
[00145482][15 00][00] device not detected.
[00158026][17 00][00] device not detected.
[00170575][17 01][00] device not detected.
[00183120][19 00][00] device not detected.
[00183171][01 00][00] v1.25.5432 -> v1.25.5432
[00183217][01 01][00] v1.25.5432 -> v1.25.5432
[00195764][09 00][00] device not detected.
[00195808]Packet upgrade failed at version checking.



[00022425]========== remo-con disconnect. boot(15) ============
[00022468]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00022512]Packet upgrade start...

[00022561]Packet checking...
[00022609]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022754]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00022800]Done.

[00022842]Version checking[1]...
[00035388][03 06][00] device not detected.
[00047932][03 05][00] device not detected.
[00047988][04 00][00] v1.48.0.0 -> v1.48.0.0
[00060533][11 00][00] device not detected.
[00073085][11 01][00] device not detected.
[00085633][12 00][00] device not detected.
[00098185][12 01][00] device not detected.
[00110728][12 02][00] device not detected.
[00123277][12 03][00] device not detected.
[00145821][15 00][00] device not detected.
[00158367][17 00][00] device not detected.
[00170911][17 01][00] device not detected.
[00183458][19 00][00] device not detected.
[00183502][01 00][00] v1.25.5432 -> v1.25.5432
[00183551][01 01][00] v1.25.5432 -> v1.25.5432
[00196095][09 00][00] device not detected.
[00196148]Packet upgrade failed at version checking.



[00022610]========== remo-con disconnect. boot(15) ============
[00022655]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00022699]Packet upgrade start...

[00022749]Packet checking...
[00022794]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022842]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00022885]Done.

[00022941]Version checking[1]...
[00035484][03 06][00] device not detected.
[00048032][03 05][00] device not detected.
[00048086][04 00][00] v1.48.0.0 -> v1.48.0.0
[00060635][11 00][00] device not detected.
[00073179][11 01][00] device not detected.
[00085725][12 00][00] device not detected.
[00098273][12 01][00] device not detected.
[00110818][12 02][00] device not detected.
[00123362][12 03][00] device not detected.
[00145908][15 00][00] device not detected.
[00158452][17 00][00] device not detected.
[00171006][17 01][00] device not detected.
[00183550][19 00][00] device not detected.
[00183596][01 00][00] v1.25.5432 -> v1.25.5432
[00183640][01 01][00] v1.25.5432 -> v1.25.5432
[00196186][09 00][00] device not detected.
[00196350]Packet upgrade failed at version checking.



[00022619]========== remo-con disconnect. boot(15) ============
[00022664]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x43104bea].
[00022710]Packet upgrade start...

[00022764]Packet checking...
[00022811]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022859]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00022903]Done.

[00022957]Version checking[1]...
[00035503][03 06][00] device not detected.
[00048050][03 05][00] device not detected.
[00048108][04 00][00] v1.48.0.0 -> v1.48.0.0
[00060656][11 00][00] device not detected.
[00073202][11 01][00] device not detected.
[00085747][12 00][00] device not detected.
[00098293][12 01][00] device not detected.
[00110842][12 02][00] device not detected.
[00123388][12 03][00] device not detected.
[00145933][15 00][00] device not detected.
[00158480][17 00][00] device not detected.
[00171028][17 01][00] device not detected.
[00183574][19 00][00] device not detected.
[00183619][01 00][00] v1.25.5432 -> v1.25.5432
[00183666][01 01][00] v1.25.5432 -> v1.25.5432
[00196212][09 00][00] device not detected.
[00196258]Packet upgrade failed at version checking.



[00012586]========== 2017.11.15 15:43:49. boot(15) ============
[00012637]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x285782f5].
[00012685]Packet upgrade start...

[00012738]Packet checking...
[00012787]Packet vlink 01.11.0020 <-> 01.11.0020.
[00012838]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00012890]Done.

[00012938]Version checking[1]...
[00013023][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00013097][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013155][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013278][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013398][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013449][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013538][12 00][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00013627][12 01][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00013831][12 02][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00013932][12 03][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00044481][15 00][00] device not detected.
[00044568][17 00][00] v1.1.1.7 -> v1.1.1.7
[00044688][17 01][00] v1.0.2.7 -> v1.0.2.7
[00044768][19 00][00] v255.255.255.254 -> v1.0.8.96
[00044816][01 00][00] v1.25.5432 -> v1.25.5432
[00044875][01 01][00] v1.25.5432 -> v1.25.5432
[00044948][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
[00044997]Done.

[00047052]Waiting for user confirm...
[00057101]Timeout, start upgrade automatically.

[00057209]Firmware upgrading[1]...
[00057273][12 00] Firmware upgrade start...
[00117657][12 00] Firmware upgrade finished successfully.
[00117722][12 01] Firmware upgrade start...
[00174361][12 01] Firmware upgrade finished successfully.
[00174427][12 02] Firmware upgrade start...
[00232474][12 02] Firmware upgrade finished successfully.
[00232541][12 03] Firmware upgrade start...
[00302104][12 03] Firmware upgrade finished successfully.
[00302365][03 06] Firmware upgrade start...
[00690716][03 06] Firmware upgrade finished successfully.
[00690792][09 00] Firmware upgrade start...
[00743009][09 00] Firmware upgrade finished successfully.
[00743061]Done.

[00743110]Version checking[2]...
[00743189][03 06][05] v2.4.20.50 -> v2.4.20.50
[00743308][03 05][00] v34.2.0.9 -> v34.2.0.9
[00743362][04 00][00] v1.48.0.0 -> v1.48.0.0
[00743488][11 00][00] v1.8.0.0 -> v1.8.0.0
[00743608][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00743670][11 01][00] v1.8.0.0 -> v2.0.0.33
[00743762][12 00][05] v1.12.0.0 -> v1.12.0.0
[00743867][12 01][05] v1.12.0.0 -> v1.12.0.0
[00743967][12 02][05] v1.12.0.0 -> v1.12.0.0
[00744062][12 03][05] v1.12.0.0 -> v1.12.0.0
[00776611][15 00][00] device not detected.
[00776719][17 00][00] v1.1.1.7 -> v1.1.1.7
[00776854][17 01][00] v1.0.2.7 -> v1.0.2.7
[00776919][19 00][00] v255.255.255.254 -> v1.0.8.96
[00776968][01 00][00] v1.25.5432 -> v1.25.5432
[00777142][01 01][00] v1.25.5432 -> v1.25.5432
[00777219][09 00][05] v4.1.0.0 -> v4.1.0.0
[00777272]Packet upgrade failed at version checking.



[00022679]========== remo-con disconnect. boot(15) ============
[00022731]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x285782f5].
[00022781]Packet upgrade start...

[00022844]Packet checking...
[00022896]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022948]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00023002]Done.

[00023055]Version checking[1]...
[00023142][03 06][00] v2.4.20.50 -> v2.4.20.50
[00023223][03 05][00] v34.2.0.9 -> v34.2.0.9
[00023297][04 00][00] v1.48.0.0 -> v1.48.0.0
[00023423][11 00][00] v1.8.0.0 -> v1.8.0.0
[00023562][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00023613][11 01][00] v1.8.0.0 -> v2.0.0.33
[00023703][12 00][00] v1.12.0.0 -> v1.12.0.0
[00023823][12 01][00] v1.12.0.0 -> v1.12.0.0
[00023943][12 02][00] v1.12.0.0 -> v1.12.0.0
[00024043][12 03][00] v1.12.0.0 -> v1.12.0.0
[00056603][15 00][00] device not detected.
[00056724][17 00][00] v1.1.1.7 -> v1.1.1.7
[00056844][17 01][00] v1.0.2.7 -> v1.0.2.7
[00069396][19 00][00] device not detected.
[00069450][01 00][00] v1.25.5432 -> v1.25.5432
[00069509][01 01][00] v1.25.5432 -> v1.25.5432
[00069586][09 00][00] v0.0.0.0 -> v4.1.0.0 need upgrade.
[00069639]Done.

[00071690]Waiting for user confirm...
[00081742]Timeout, start upgrade automatically.

[00081854]Firmware upgrading[1]...
[00081933][09 00] Firmware upgrade start...
[00134097][09 00] Firmware upgrade finished successfully.
[00134159]Done.

[00134209]Version checking[2]...
[00134324][03 06][00] v2.4.20.50 -> v2.4.20.50
[00134423][03 05][00] v34.2.0.9 -> v34.2.0.9
[00134486][04 00][00] v1.48.0.0 -> v1.48.0.0
[00134623][11 00][00] v1.8.0.0 -> v1.8.0.0
[00134762][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00134812][11 01][00] v1.8.0.0 -> v2.0.0.33
[00134916][12 00][00] v1.12.0.0 -> v1.12.0.0
[00135156][12 01][00] v1.12.0.0 -> v1.12.0.0
[00135255][12 02][00] v1.12.0.0 -> v1.12.0.0
[00135355][12 03][00] v1.12.0.0 -> v1.12.0.0
[00167908][15 00][00] device not detected.
[00168013][17 00][00] v1.1.1.7 -> v1.1.1.7
[00168173][17 01][00] v1.0.2.7 -> v1.0.2.7
[00168244][19 00][00] v255.255.255.254 -> v1.0.8.96
[00168297][01 00][00] v1.25.5432 -> v1.25.5432
[00168350][01 01][00] v1.25.5432 -> v1.25.5432
[00168423][09 00][05] v4.1.0.0 -> v4.1.0.0
[00168484]Packet upgrade failed at version checking.



[00022217]========== remo-con disconnect. boot(15) ============
[00022277]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x285782f5].
[00022333]Packet upgrade start...

[00022396]Packet checking...
[00022457]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022514]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00022578]Done.

[00022637]Version checking[1]...
[00035189][03 06][00] device not detected.
[00047761][03 05][00] device not detected.
[00047852][04 00][00] v1.48.0.0 -> v1.48.0.0
[00060414][11 00][00] device not detected.
[00072968][11 01][00] device not detected.
[00085536][12 00][00] device not detected.
[00098091][12 01][00] device not detected.
[00110663][12 02][00] device not detected.
[00123218][12 03][00] device not detected.
[00155779][15 00][00] device not detected.
[00168337][17 00][00] device not detected.
[00180906][17 01][00] device not detected.
[00193462][19 00][00] device not detected.
[00193521][01 00][00] v1.25.5432 -> v1.25.5432
[00193587][01 01][00] v1.25.5432 -> v1.25.5432
[00206144][09 00][00] device not detected.
[00206201]Packet upgrade failed at version checking.



[00022607]========== remo-con disconnect. boot(15) ============
[00022665]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0xa84c0aac].
[00022716]Packet upgrade start...

[00022771]Packet checking...
[00022824]Packet vlink 01.11.0020 <-> 01.11.0020.
[00022875]Record vlink 01.11.0020 <-> 01.11.0020 (flow = 0).
[00023028]Done.

[00023089]Version checking[1]...
[00023209][03 06][00] v2.4.20.50 -> v2.4.20.50
[00023329][03 05][00] v34.2.0.9 -> v34.2.0.9
[00023391][04 00][00] v1.48.0.0 -> v1.48.0.0
[00023549][11 00][00] v1.8.0.0 -> v1.8.0.0
[00023709][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00023765][11 01][00] v1.8.0.0 -> v2.0.0.33
[00023869][12 00][00] v1.12.0.0 -> v1.12.0.0
[00024008][12 01][00] v1.12.0.0 -> v1.12.0.0
[00024129][12 02][00] v1.12.0.0 -> v1.12.0.0
[00024249][12 03][00] v1.12.0.0 -> v1.12.0.0
[00046807][15 00][00] device not detected.
[00046933][17 00][00] v1.1.1.7 -> v1.1.1.7
[00047090][17 01][00] v1.0.2.7 -> v1.0.2.7
[00059646][19 00][00] device not detected.
[00059698][01 00][00] v1.25.5432 -> v1.25.5432
[00059761][01 01][00] v1.25.5432 -> v1.25.5432
[00059831][09 00][00] v0.0.0.0 -> v4.1.0.0 need upgrade.
[00059883]Done.

[00061941]Waiting for user confirm...
[00071992]Timeout, start upgrade automatically.

[00072096]Firmware upgrading[1]...
[00072184][09 00] Firmware upgrade start...
[00124323][09 00] Firmware upgrade finished successfully.
[00124378]Done.

[00124435]Version checking[2]...
[00124527][03 06][00] v2.4.20.50 -> v2.4.20.50
[00124626][03 05][00] v34.2.0.9 -> v34.2.0.9
[00124685][04 00][00] v1.48.0.0 -> v1.48.0.0
[00124841][11 00][00] v1.8.0.0 -> v1.8.0.0
[00124981][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00125033][11 01][00] v1.8.0.0 -> v2.0.0.33
[00125135][12 00][00] v1.12.0.0 -> v1.12.0.0
[00125261][12 01][00] v1.12.0.0 -> v1.12.0.0
[00125361][12 02][00] v1.12.0.0 -> v1.12.0.0
[00125470][12 03][00] v1.12.0.0 -> v1.12.0.0
[00148027][15 00][00] device not detected.
[00148136][17 00][00] v1.1.1.7 -> v1.1.1.7
[00148291][17 01][00] v1.0.2.7 -> v1.0.2.7
[00148399][19 00][00] v255.255.255.254 -> v1.0.8.96
[00148454][01 00][00] v1.25.5432 -> v1.25.5432
[00148507][01 01][00] v1.25.5432 -> v1.25.5432
[00148605][09 00][05] v4.1.0.0 -> v4.1.0.0
[00148778]Packet upgrade failed at version checking.

In your case, I would recommend you send it back for check: http://www.dji.com/support. Please contact our support and I'm sure they will help you fix it.

Thank you for the answer, I'm going to see with them.
Thank you

Hellow i have the same problem and something more . the screen after update it has green line ... i don;t know what is thit and how i can fix it

LUIS401 Posted at 2017-11-16 00:35
[00013079]========== remo-con disconnect. boot(15) ============
[00013424]Packet [C:\P3S_FW_V01.10.0090.bin] detected, card sn [0x2857835f].
[00013461]Packet upgrade start...

If you only replaced the camera, and not the entire gimbal, with board, it won't work. There is a calibration needed that only DJI can do.