Hi am updating to V01.04.0000 do I need to do this with each battery?

Not the foggiest how to use this forum any one available for a chat

Not for 1.4.0000

Just connect the drone to the APP, then check the APP,  a prompt will pop out if the firmware of some modules such as batteries does not match aircraft firmware, then Slide to Update.

DJI Diana Posted at 2017-11-16 20:17
Just connect the drone to the APP, then check the APP,  a prompt will pop out if the firmware of some modules such as batteries does not match aircraft firmware, then Slide to Update. [view_image]

I don't get this prompt/ window / choice...

fansa4b44b4c Posted at 2017-11-19 15:15
I don't get this prompt/ window / choice...

Then you don't need to update the batteries. They only show up when you need to.

fansa4b44b4c Posted at 2017-11-19 15:15
I don't get this prompt/ window / choice...

AEM74 is correct, then you don't need to update it.

AEM74 Posted at 2017-11-19 15:48
Then you don't need to update the batteries. They only show up when you need to.

Bugger when you got four batteries and forget which ones are were charged enough to up date. Because doing a couple batteries  drags my remote down to closer to fifty than 60% and anything between  50% and 60% no go area.

AEM74 Posted at 2017-11-19 15:48
Then you don't need to update the batteries. They only show up when you need to.

Thanks they must have updated when I was trying other stuff, still can't trust it , pretty miffed I'm sure an expert like you could get me airborne in minuets, if I could talk on a phone, ( remember them lol )I'll  check back for advise in another day or so ,check app comes up on my RC, drone skittish, I've tried plugging  android into comp to see if that would help, also cam calibration is causing problems any help appreciated