I am really upset coz my iPad 1gen doesn't work well.

Samsung Galaxy S7 Edge and an iPhone5s
both works fine!

OP5 and Huawei Mediapad M3

Hi, Zoe. I would recommend you use the devices in the recommended list. Thanks for your cooperation.

That list must be very old. The new IOS devices are missing, like ipad 9.7 and all the pro models.

And check here:

http://www.phantomhelp.com/tips/18/best-tabletsphones-for-dji-go

I use iPhone X, iPad mini 2 and Samsung Galaxy Tab 2.

iPhone 6s since day one of flying the Spark

Using the Samsung Tab 4  7"- I don't know why it works, but it does. It's completely underpowered. Counting my blessings!

I use a iPhone 5s or a iPad 4 mini, they always work for me, Spark, P4P + , P3 std, Osmo.   bye, davawt

Nexus 5X, no problems outside of Europe. Within Europe the range is limited...

I am using Apple iPhone 5c.  

Using Samsung J5 Pro was working very well till the new update now it wont let me use the OTG, but i shall give the wifi a try ,although with WIFI there is  huge lag in streaming

I use my SE yet I can’t not get rid of the warning screen that comes up

IiPhone 8. Was using an iPhone 6S but in my opinion the 8 is a lot more stable with the Go4 app.

ArnoSpark Posted at 2017-12-1 04:43
Using Samsung J5 Pro was working very well till the new update now it wont let me use the OTG, but i shall give the wifi a try ,although with WIFI there is  huge lag in streaming

That with otg is in 4.1.18 not a problem of your phone

Started out with a Samsung Tab, it was terrible. Now I use the iPad Mini 4, works great.

I use Xiaomi Note 4a.

I am primarily using my iPad Air 2.  Have also used my iPhone 5s, but like the larger screen on the iPad.  Both work great.

I use Xperia Z3 Compact and Oneplus 3 both works fine so far.

Xiaomi mi5

Both my devices work great, OnePlus3 and the amazingly Xiaomi Mi Max2 ( 6.4 inch FHD screen)

Hi all, i start my Spark experience with my Samsung A3 2017 phone, but after a wile I decided to dedicate a device exclusively to the spark. So i bought a cheap one Huawei Tablet T3 7", and have no sim inside of it  to avoid any incoming call, messages, social or whatever.
PS: need to 3D print support to fit it in RC arms, you can find it many kind on thingiverse.