Hi folks, how do i do this manually please?

I have connected my ac to DJI Assistant 2 but all i see in there is the firmware, says upto date and official
I see nothing regarding the NF DB :/

Any advice please?

Turn on your RC and Phantom and go into the DJI GO 4 app to the main settings page and down the bottom in About where it shows you the firmware versions there is also an Update which should update the no fly  database.

mmmm, just checked, thank you but there is no update available, says 1.00.01.05

I didnt do the update when out in the field, i cancelled it, so not sure whats going on, i cannot fly higher than 30m and its not in beginner mode :/

Ok, looks like its sorted, i did a refresh of the AC firmware and it looks like i can now go above 30m

Bashy Posted at 2017-12-13 00:50
Ok, looks like its sorted, i did a refresh of the AC firmware and it looks like i can now go above 30m

Nice to hear ... I hope it can go up more than 30 ahha

Nebuchadnezzar Posted at 2017-12-13 00:55
Nice to hear ...  I hope it can go up more than 30 ahha

I tested it in the garden (yeah i know) took it to 40 and straight back to my hand, all good

Bashy Posted at 2017-12-13 01:09
I tested it in the garden (yeah i know) took it to 40 and straight back to my hand, all good

fLY SAFE & eNJOY !!

You too chap

Bashy Posted at 2017-12-13 01:15
You too chap

just waiting for a better weather .....

it will automatically promt up on the dji go app for the update. Make sure to connect it your mobile devise to internet contention.

Not always, i cancled the update out in the field, got home and it wouldnt prompt me to update again and cause of this i couldnt go higher than 30m
I did a refresh of the firmware and now i can go higher

Bashy Posted at 2017-12-13 03:10
Not always, i cancled the update out in the field, got home and it wouldnt prompt me to update again and cause of this i couldnt go higher than 30m
I did a refresh of the firmware and now i can go higher

Glad to hear that the issue is resolved, and if a user needs to update the fly database on DJI Assistant 2, he can update/refresh the firmware directly. Should you have any further questions, please feel free to contact us at any time, we're glad to help.

Thank you Thor