Please select Into the mobile phone version | Continue to access the computer ver.
no response from simulator in Assist 2
521 2 2018-1-4
Uploading and Loding Picture ...(0/1)
o(^-^)o
bobjonesx
lvl.1
United States
Offline

Am using MacAir Mac OS 10.13, Assistant 2 ver 1.1.6 (just downloaded and reinstalled)

Assist 2 can link to the Mavic, and I can open the simulator (pressing Start Simulating) showing the Mavic on the ground. However the controls have no effect. The RC gives the warning: Max Radius alternating with NFZ Limit.

Any idea how to fix this?
And, by the way, should I get this going, is there a way to get into camera view mode so I can see where I am going?

thx
2018-1-4
Use props
DJI Susan
Administrator
Offline

Hi Bob, has the aircraft and RC been linked well before connecting the PC? If yes, please change the longitude and latitude to see whether the message remains.
2018-1-6
Use props
bobjonesx
lvl.1
United States
Offline

Thanks for the reply. Sorry for the delay in answering. I am still finding my way around the forum.
2018-1-9
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules