Hi together

Start preparing the P4P for the next tours and try some settings for the cam.

During this I recognized movements of the gimbal after shooting pictures.

P4P was standing fix on a stable ground - RC approx. 1.5m far away.

Gimbal calibration was succefully done.

https://www.dropbox.com/s/prl0nhpzug4iaj9/Datei%2027.01.18%2C%2017%2029%2023.mp4?dl=0

Any recommendation?

… upgrading to the new firmware in relation to IOS 11.2.2 was not done due to the last warnings for P4P with HDMI module.

Using

• P4P
• Copter firmware: 01.04.0602
• Controller software: 01.04.01.00
• Databases of copter and App: 01.00.01.05
• App: 4.2.4
• iPad 4 mini, 128 GB cellular, IOS 11.2.2
• Short cable connection from RC to iPad
• Free Space on Ipad 62 GB
  

Thanks for some comments

Do you use mechanical shutter? If yes try to use only electronic shutter and test again.

kykphantom Posted at 2018-1-27 09:26
Do you use mechanical shutter? If yes try to use only electronic shutter and test again.

Correct I use it - will switch off and come back - thanks for response

Also turn off gimble lock..

kykphantom Posted at 2018-1-27 09:26
Do you use mechanical shutter? If yes try to use only electronic shutter and test again.

kykphantom this works :-)
and thanks for your fast response

Mobilcams Posted at 2018-1-27 09:50
Also turn off gimble lock..

Hi Mobilcams,
tried it also and switch on the mechanical shutter before - and the problem occur again -

But nevertheless if I think about what you have mentioned it  make also sense to follow your recommendation
Thanks to you.