Please select Into the mobile phone version | Continue to access the computer ver.
01.00.0200 Max distance reached
1471 10 2018-2-12
Uploading and Loding Picture ...(0/1)
o(^-^)o
Supong
Second Officer
Thailand
Offline

Latest fw 01.00.0200
iOS DJI Go 4 v 4.2.6

Not even take off, I got the maximum distance reached warning while I moved the MA.

I had never got this warning in previous firmware.
2018-2-12
Use props
fansa7dc5944
Second Officer
Flight distance : 50988 ft
  • >>>
Thailand
Offline

Rolled everything back
2018-2-12
Use props
Tadango
Second Officer
Flight distance : 232359 ft
United Kingdom
Offline

With the new firmware i had a max height warning at 5.0 meters when 50 meters was set as a limit..... maybe there is an issue there.
2018-2-12
Use props
Supong
Second Officer
Thailand
Offline

Probably it is not the firmware but DJI Go 4 that give false warning
2018-2-12
Use props
Tadango
Second Officer
Flight distance : 232359 ft
Netherlands
Offline

Supong Posted at 2018-2-12 07:48
Probably it is not the firmware but DJI Go 4 that give false warning

But the Air dropped about 1 meter when the warning came...
2018-2-12
Use props
Supong
Second Officer
Thailand
Offline

Now confirmed. Whenever I flip the MA upsidedown (to turnoff) the max flight distance reached warning will be fired up. Hmm.... should I be concerned.

2018-2-12
Use props
Tadango
Second Officer
Flight distance : 232359 ft
Netherlands
Offline

Sounds like it is a warning from the downward sensor having a limit. When you turn it very the point below the Air is much further away.
2018-2-12
Use props
DJI Thor
Administrator
Flight distance : 13602 ft
Offline

Sorry for the late reply. Did the issue resolve? There is a new firmware v01.00.0400 for Mavic Air since, please also try this version and see if it has the same issue or any other problems.
2018-5-10
Use props
GDL
First Officer
Flight distance : 2768694 ft
Singapore
Offline

Did you check the maximum high and distance set in DJI Go?
2018-5-10
Use props
fansa7dc5944
Second Officer
Flight distance : 50988 ft
  • >>>
Thailand
Offline

Thankyou all. This thread was posted since Feb. I ignored the warning message. I have had no other problem. Just worried about the message. It still appears in latest firmware when I flip the aircraft to turn off. Possibly the program designer should discard the relevant sensor reading while the aircraft is not flying.
2018-5-10
Use props
fansaf90809b
lvl.1
Offline

Also should not flip the air to turn off. Power down with the right stick.
2018-5-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules