Hi, forum,
I'm using phantom 3 standard aircraft and there is no image transmission and only thing I can see is black screen.
I can't record video or nothing as that panel is unnhighlighted.
Also Theres a massage saying Image transmission signal weak. Also I can see radio signal 'poor' in the menu.
There is no image transmitting..

You're going to have to give more info if you really want an answer.

WD9EON Posted at 2018-2-17 10:14
You're going to have to give more info if you really want an answer.

After I connect dji app with the phantom 3 standard I can see black screen. Also there is a massage 'image transmission signal weak'. But I can control the camera with phone and RC. I connect the drone with Galaxy note 4, Y6ii, s7, same problem on each device. I can't do firmware update as SD card not showing up. Please refer the screenshots.

Thanks for your reply. If you need more info please reply. Appreciate your kind reply

What mobile is used? What OS version and Go app version is on your mobile?

I used Note 4 Marshmillow dji app,
Also after that problem I try to connect the drone with Huawei Y6II, And S7 Nouget. But nothing fixed. I used latest version of dji app. But I haven't tried in IOS mobile

fans33a1f6ad Posted at 2018-2-17 10:36
I used Note 4 Marshmillow dji app,
Also after that problem I try to connect the drone with Huawei Y6II, And S7 Nouget. But nothing fixed. I used latest version of dji app. But I haven't tried in IOS mobile

Are you using the Go version before P4?  I just looked at mine and I do not have the channel options that you are showing.  
Also make sure you select the P3 Standard from the menu as well.  
Are the lights on the Remote Control all green?  Is the light on the gimbal also green?

yes to all above wd

djiuser_gl6QNuvh5GV1 Posted at 2018-2-17 11:32
yes to all above wd

Looks like you are indoors, wonder if the wifi is causing your problem.

Looks like you’re sd card is full,try emptying it

have you tried to relink the rc to ac by pushing the small led light on one of the legs on drone while rc is on??what colour is the light on rc??just push the small light withh a pencil for aboy 5 sec

Rene Jensen Posted at 2018-2-17 21:37
have you tried to relink the rc to ac by pushing the small led light on one of the legs on drone while rc is on??what colour is the light on rc??just push the small light withh a pencil for aboy 5 sec

I did it I got the massage no signal after pressing link button on aircraft. But after relinking it I got same problem

WD9EON Posted at 2018-2-17 11:26
Are you using the Go version before P4?  I just looked at mine and I do not have the channel options that you are showing.  
Also make sure you select the P3 Standard from the menu as well.  
Are the lights on the Remote Control all green?  Is the light on the gimbal also green?

Yes both grimble and RC lights are green. And lights are green.. Only problem is no image transmission

I did formating it, reinserting it, Putting firmware on sd card and the craft not responding to sd

maybe try to uninstall app and clear catche of the app and reinstall it??

fans33a1f6ad Posted at 2018-2-17 10:30
After I connect dji app with the phantom 3 standard I can see black screen. Also there is a massage 'image transmission signal weak'. But I can control the camera with phone and RC. I connect the drone with Galaxy note 4, Y6ii, s7, same problem on each device. I can't do firmware update as SD card not showing up. Please refer the screenshots.

Here is any thing wrong.  The WIFI strength shows up a HD symbol. This is more for the P3A/P and may be for the SE but not for a Standard. The Card space is full or has been show up with wrong value.
All channels are at zero. Try to force end all apps inclusive DJI Go and clear all data related to the Go app in cache. Try the option disable locale video cache for the Go app.

may be worthwhile trying the old remove, start etc.

Remove the SD card from the P3 then start up as normal (RC, galaxy etc, & then the P3). If transmission starts then all good.Shut down, reinstall SD & away you go. If that doesn't work then listen to other advice from forum members.

Peterx Posted at 2018-2-18 02:30
Here is any thing wrong.  The WIFI strength shows up a HD symbol. This is more for the P3A/P and may be for the SE but not for a Standard. The Card space is full or has been show up with wrong value.
All channels are at zero. Try to force end all apps inclusive DJI Go and clear all data related to the Go app in cache. Try the option disable locale video cache for the Go app.

I did it.. but nothing changed..