Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 2 won't power on after crash
428 7 2018-2-24
Uploading and Loding Picture ...(0/1)
o(^-^)o
Odysseus
lvl.3
Flight distance : 368727 ft
  • >>>
Nigeria
Offline

Inspire 2 refuses to power on after a light crash into a tree. Didn't hit the ground. Hand caught. Tried different set of batteries. After power on the light inside the drone blinks three times and goes off. Video attached.

2018-2-24
Use props
Kiffkool
Second Officer
Flight distance : 375709 ft
United Kingdom
Offline

Attach to PC via usb and Assistant software and check the crafts status of the imu's etc, maybe try to recalibrate and check all visible connection in the airframe?
2018-2-24
Use props
RichJ53
Captain
Flight distance : 1671171 ft
  • >>>
United States
Offline

It is possible you triggered a protection circuit when the props were stopped by force. Over current or short circuit protection cannot be fixed by the user and will need to be sent into the DJI repair Shop

Rich
2018-2-24
Use props
Matthew Dobrski
Captain
Flight distance : 1616188 ft
  • >>>
Canada
Offline

RichJ53 Posted at 2018-2-24 08:54
It is possible you triggered a protection circuit when the props were stopped by force. Over current or short circuit protection cannot be fixed by the user and will need to be sent into the DJI repair Shop

Rich

Rich, this kind of troubleshooting knowledge is what I'm looking for! Nowhere to find, known to a few only, discovered by accident etc.
2018-2-24
Use props
RichJ53
Captain
Flight distance : 1671171 ft
  • >>>
United States
Offline

Matthew Dobrski Posted at 2018-2-24 13:15
Rich, this kind of troubleshooting knowledge is what I'm looking for! Nowhere to find, known to a few only, discovered by accident etc.


Hi Matthew,
Thanks...  You are right, I found out about some of these things by accident. The protection installed on the power circuit could be a diode, MOV or other type of fuse.  I had a horizon QX 350 that had a abrupt stop of the motors   and it would not power on after that. No damage was found on the drone at all, even the props were not broken.   It popped the protection on the main board. (expensive) for a hobby drone at the time several years ago before the new inspires and phantoms.
Rich

diode.jpg
2018-2-25
Use props
DJI Elektra
Administrator
China
Offline

Hi, Odysseus. Did you try to change a battery? I would recommend you contact our support and start a case: http://www.dji.com/support Thanks for your support.
2018-2-25
Use props
Odysseus
lvl.3
Flight distance : 368727 ft
  • >>>
Nigeria
Offline

Tried 4 pairs of batteries and nothing yet. Still the same thing
2018-3-2
Use props
Odysseus
lvl.3
Flight distance : 368727 ft
  • >>>
Nigeria
Offline

I just might take it apart if I can't find any other solution or information
2018-3-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules