Any genius here who can explain this very annoying problem with my Mavic Pro and Goggles, any help will be appreciated.

I am used to record in 4K or 2.7K, PAL, 25fps and today, during flight I noticed all video settings where reset to NTSC, HD, 30fps
So I went into videosetup in the Go 4 app and set back to 2.7K, PAL, 25fps
I continued flying and powered-on my Goggles. As soon as connection was established the video reset again to NTSC,HD,30fps

I can reproduce this, it happens anytime when powering on the Goggles.

power-on order I use: first RC then Aircraft then Goggles

Latest firmware (V01.04.0300) is installed on all devices
software: DJI Go 4 (Android, version 4.2.6)

Am I doing something wrong?

https://mavicpilots.com/threads/ ... -auto-switch.18380/
Scroll halfway down the page and watch the video !! Cheers mate !!

DINGO DOWN UNDA Posted at 2018-3-6 13:41
https://mavicpilots.com/threads/ ... -auto-switch.18380/
Scroll halfway down the page and watch the video !! Cheers mate !!

Well thanks mate, this was an excellent video and solves the problem.

I'm happy to know you have figured it out. Feel free to contact us if there is any further question.

DJI Susan Posted at 2018-3-11 01:58
I'm happy to know you have figured it out. Feel free to contact us if there is any further question.

Susan I seem to be having this problem repeatedly I need to change from NTSC every time I start out then re set the goggles as well I use all the tips re the 2.7 K etc Constantly change from smooth mode....very frustrating. Do you have any suggestions for me?....Please!

Agphotowings Posted at 8-30 21:45
Susan I seem to be having this problem repeatedly I need to change from NTSC every time I start out then re set the goggles as well I use all the tips re the 2.7 K etc Constantly change from smooth mode....very frustrating. Do you have any suggestions for me?....Please!

Hi there, please kindly set the Liveview Formate Settings of the Goggles as Keep Current Mode, then check whether it works.

DJI Susan Posted at 2018-3-11 01:58
I'm happy to know you have figured it out. Feel free to contact us if there is any further question.

Hello.  I have the DJI goggles Racing Edition and when I am in analog the picture is blurry and very grainy.  
it's the same way with all of my quads. I also have fatshark goggles and the picture is crystal clear not sure what's happening.
I made sure that the polarity of my antennas are similar. Please help.