Is it possible to connect a Lightbridge 2 to a Z15 GH3 ??

I have got power from a 12v Digital Regulator to the Lightbridge but no video ??

If so could someone tell me how ..



Thanks in advance

Probably need a video of the Assistant...I have LB 1s with a GH 3...

Sorry that the Lightbridge 2 is not compatible with Z15 GH3.

Replaced GH3 with new Z15-GH4(HD) ... using GH4 camera .. no video from GH4 to my Lightbridge 2 air unit (video led solid RED) ?? Please help

Installed components list:

1)A2 Flight Controller all firmware updated

2)Z15-GH4 (HD)

3)Lightbridge 2

4)GH4 camera with Proper Lens

Controller (Ground unit is connected) can see voltage on screen and firmware versions

Camera is set to settings in manual

can see the inputs in the Zenmuse Assistant 1.4 Software with connected to a computer

All A2 functions and channel mapping is GOOD ! Calibrated

Z15 Zenmuse functions to level and GCU is working properly

Errors and non functioning list:

1)No video (red light on video screen)
2)No Gimbal tilt control
3)DJI Assistant 2 recognizes Lightbridge 2 but when settings is opened it only shows linking and nothing else

adding photos

FPVOne Posted at 2018-3-28 22:08
[view_image]
[view_image]
[view_image]

Just a stupid question....did you turn the camera on?  Only asking because I forgot once....