Please select Into the mobile phone version | Continue to access the computer ver.
SPARK "No positioning (Atti)" or "Ready to go (no gps)"
6538 2 2018-3-11
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_Da6gzq4F5ejF
New
United States
Offline

When i try to fly my drone I get either the message "No positioning (Atti)" or "Ready to go (no gps)"
while i was typing this (with my drone connected to the controller and my IPhone) the yellow in the image turned to greeen and the GPS was connected and ready to go! as i was about to walk out the door, the message appeared again and i came back to write this.

im new to drones so i have no idea what to do, any suggestions?

2018-3-11
Use props
Nidge
Captain

United Kingdom
Offline

If you are powering up indoors you’ll be lucky to get a usable GPS signal as it will be severely attenuated by the building. In this situation the Spark obtains positional data from the downward facing sensors. Power up outside in an area that has an unobstructed view of the sky and you’ll quickly obtain a GPS lock with a low DOP figure.
2018-3-11
Use props
DJI Elektra
DJI team
Hong Kong
Offline

Please change an environment again. I would recommend you choose a wide place with good GPS signal. Thanks for your support.
flight environment.PNG
2018-3-12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules