Please select Into the mobile phone version | Continue to access the computer ver.
Motors dying mid shoot
650 2 2018-3-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
djiuser_pnSl7XPC4Fn3
New

United States
Offline

So my Ronin M is brand new, I've only used it a couple of times. The last time I took it out, I'd be a couple minutes into shooting and the motors would stop and my camera would go limp. I had to turn the rig off and on and they'd fire back up. and 5-10 minutes later, the same thing.

Any suggestions?

Thanks.
2018-3-13
Use props
DJI-Mark
First Officer

United States
Offline

Have you tried balancing the Ronin M? It may be that the motors are working hard due to an imbalance. You can get the software to balance here: https://www.dji.com/ronin-m/info#downloads


Feel free to send me a personal message as you have any further questions.
2018-3-13
Use props
CDMSystemsLLC
lvl.1
Flight distance : 1766572 ft
United States
Offline

Had same issue.  My cam op was forgetting to balance camera vertically and the unit was very bottom heavy.  The camera should balance just about in any position with a slow 2-3 second return to level when gimbal is OFF and limp.  You'll burn up the gimbal motors otherwise.
2018-3-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules