Please select Into the mobile phone version | Continue to access the computer ver.
3D printed boom mount for strobes
506 4 2018-3-15
Uploading and Loding Picture ...(0/1)
o(^-^)o
Nigpd
Second Officer
Flight distance : 597677 ft
United Kingdom
Offline

[size=14.6667px]Hi

[size=14.6667px]Ive been searching without success, to try and find a file for 3D printing boom mounts to the Inspire to hold the Strobon Cree strobes

[size=14.6667px]Does anyone have a link by any chance?

[size=14.6667px]TIA

2018-3-15
Use props
Daroga
Captain
Flight distance : 3517287 ft
  • >>>
United States
Offline

Available here...

2018-3-15
Use props
Des_B
Second Officer
Flight distance : 129600 ft
United Kingdom
Offline

I use Velcro, and attach the strobe to one of the I2 batteries. No problems in over 50 flights, and only costs pennies.
2018-3-17
Use props
Nigpd
Second Officer
Flight distance : 597677 ft
United Kingdom
Offline

Des_B Posted at 2018-3-17 10:04
I use Velcro, and attach the strobe to one of the I2 batteries. No problems in over 50 flights, and only costs pennies.

that's ok for a rear facing strobe, what about a forward facing strobe?
2018-3-18
Use props
Donnie -
Captain
Flight distance : 3636782 ft
United States
Offline

Nigpd Posted at 2018-3-18 02:02
that's ok for a rear facing strobe, what about a forward facing strobe?

All you would need to do is flip the mount over on the booms for a rear facing Strobe .  The ones on the outer booms anyway .

donnie
2018-3-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules