I updated the MA today I used the DJI Assistant 2 for the updates because of a new battery.
After everything was done and loaded 100% I went to fly today and my Forward and Aft movement is very small hardly any movement.
I checked the beginner mode it was off, I recalibrated the controls everything is ok.
I even put the settings back to factory not the software just the settings it flys well but as I said in the beginning no movement.
Is there something else I may have missed.
Update its only in P mode S mode works great.

Thanks for any addvice.
Rudy

Hi, Rudy, so sorry to hear the issue that you have experienced. Please make sure everything has been updated to the latest, the firmware of the drone and the remote controller, the DJI GO4 app. I still recommend you to try the update again. For any further issue, please feel free to contact us at any time, we're glad to help. Thanks!

Try to disable obstacles avoidance.

If it's a serious flaw from the update I'm sure DJI will catch on to it quickly from multiple reports. Hopefully you get this resolve soon and start flying again. I can't imagine what you're going through

DJT_MVSP Posted at 2018-3-22 01:27
Try to disable obstacles avoidance.

i did and that helped but I went up to about 30 feet where it wasn't sensing anything and with Ob/Av on
it still was very slow to respond but with it off like you suggested it works fine.
Why should that make a difference?

Thanks for the suggestion.
Rudy

I didn't have a chance to fly since the latest update. I hope this is not a bug, otherwise, here we go again, DJI QA failing miserable again. Hope is not the case.

sky6105 Posted at 2018-3-22 04:49
i did and that helped but I went up to about 30 feet where it wasn't sensing anything and with Ob/Av on
it still was very slow to respond but with it off like you suggested it works fine.
Why should that make a difference?

Try to calibrate the vision systems with DJI assistant as shown below

DJT_MVSP Posted at 2018-3-23 08:56
Try to calibrate the vision systems with DJI assistant as shown below https://youtu.be/xfcjxfMocLM

Well I did the vision calibration made a small difference but what really made the difference was turning off active track avoidance slider.