Castino
lvl.1
United Kingdom
Offline
|
Good afternoon,
I have the P3X_FW_V01.11.0030.bin file on an SD card, put it into the Drone, booted the drone, doesnt behave like its taking the update, a sample of the results log is as follows:
========== 2018.03.03 17:50:55 =====================
Packet: P3X_FW_V01.11.0030.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0030.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2018.03.05 18:26:15 =====================
Packet: P3X_FW_V01.11.0030.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2018.03.05 18:31:20 =====================
Packet: P3X_FW_V01.11.0030.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
this goes on for about 5 pages or so and seems to be in no particular order.
I have tried a new device to ensure it wasnt the app, (now using iphone instead of android tablet) the firmware version shown on the app is "V01.11.0020+" even though from the log i am expecting it to be version 11.0030 which it doesnt seem to want to take.
I am running out of ideas here. please advise how to proceed.
Best regards
Tino
|
|