30 limited range
907 8 2018-3-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans68ee86a3
lvl.2
Flight distance : 742841 ft
United Kingdom
Offline

Has there been any solution to the 30 metre limited range in the goggles yet?It’s like being permanently stuck in beginner mode.




2018-3-27
Use props
Phantom Help
Captain
Flight distance : 228255 ft
  • >>>
United States
Offline

Start up your Phantom while it's connected to DJI GO. Once it shows it's ready to fly, connect the DJI Goggles.
2018-3-27
Use props
Plumberjohn
lvl.2
Flight distance : 742841 ft
United Kingdom
Offline

Thank you. I tried that workaround yesterday but the controls were terrible, about 5 seconds of lag between control input and movement of the drone. Made flying very difficult and no fun at all.
2018-3-27
Use props
Skyp
lvl.3
Flight distance : 9656 ft
Hong Kong
Offline

Plumberjohn Posted at 2018-3-27 06:06
Thank you. I tried that workaround yesterday but the controls were terrible, about 5 seconds of lag between control input and movement of the drone. Made flying very difficult and no fun at all.

Change PAL to NTSC and the lag will be gone.
2018-3-27
Use props
DJI Susan
Administrator
Offline

Hi there, it is recommended to connect the DJI GO first, and then switch to Goggles. As for the lag issue, please restore the Gain&Expo Settings from MC Settings and test in an open place later.
2018-3-27
Use props
Plumberjohn
lvl.2
Flight distance : 742841 ft
United Kingdom
Offline

Skyp Posted at 2018-3-27 22:37
Change PAL to NTSC and the lag will be gone.

In the DJI GO4 app? I already use NTSC. Is there a way to do that in the goggles?
2018-3-28
Use props
Plumberjohn
lvl.2
Flight distance : 742841 ft
United Kingdom
Offline

DJI Susan Posted at 2018-3-27 22:51
Hi there, it is recommended to connect the DJI GO first, and then switch to Goggles. As for the lag issue, please restore the Gain&Expo Settings from MC Settings and test in an open place later.

Thank you, I'll give this a try and report back.
2018-3-28
Use props
Skyp
lvl.3
Flight distance : 9656 ft
Hong Kong
Offline

Plumberjohn Posted at 2018-3-28 00:08
In the DJI GO4 app? I already use NTSC. Is there a way to do that in the goggles?

That will be new issue if it happens under NTSC.
2018-3-28
Use props
Plumberjohn
lvl.2
Flight distance : 742841 ft
United Kingdom
Offline

Well I took the goggles and Phantom out for a test run this evening, I followed the instructions to start up in the DJI GO4 app first then connect the goggles.
This worked perfectly for about 5 minutes then suddenly that awful lag returned. I timed it and there's 3 seconds between a control input and any movement
in the goggles. It's extremely difficult to fly like this and certainly not enjoyable. The Phantom itself flies perfectly well, it's just the image in the goggles that lags.
Reconnecting to the GO 4 app and everything goes back to normal.
2018-3-28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules