My mavic dont upgrad firmware.
Since I bought it, it has upgrade issues. it's in version 1.03.0550 and that's it. alias, before he was in 300 and after trying thousands of times, he went to 550. I've tried a lot, and for a while, I gave up. Now I'm trying again. it gives error during update, error 0x020106. Is there any new procedure to overcome this?

Marcos, please provide me with your DJI account, I will forward you a beta to try first.

I am having the same problem but gettign slightly different errors messages.

DJI Account: jeff@minolta1034.com

DJI Thor Posted at 2018-4-12 18:20
Marcos, please provide me with your DJI account, I will forward you a beta to try first.

Hey can I get access to this beta as well?

minolta1034 Posted at 2018-4-18 11:23
Hey can I get access to this beta as well?

Good news

I don't need upgrade to beta firmware.
I solved it by doing a normal upgrade straight from version 350 to the most current version using a MacBook. I have noticed in other forums that several also had the same problem and what they all had in common were having this problem using Windows-based computers or Android phones and tablets. And who managed to solve it, did using some OS based device

MarcosKoller Posted at 2018-4-18 12:24
Good news

I don't need upgrade to beta firmware.

This solution does not work for me.

Same error 0x020106

minolta1034 Posted at 2018-4-18 00:12
[view_image]

I had forwarded you the beta. However, please note that if the current version of your drone is later than v1.04.0000, the beta might not work for you. If the current version is prior than that version, please refer to the steps below.
Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.
2. Upgrade the firmware V 01.03.0813.
3. Once it's done, please press the "Record" button on RC and make sure it's recording, then start to upgrade firmware to the latest version.
See if it works.

MarcosKoller Posted at 2018-4-18 12:24
Good news

I don't need upgrade to beta firmware.

Good to know that you can get it resolved by yourself, Marcos.

minolta1034 Posted at 2018-4-18 15:26
This solution does not work for me.

Same error 0x020106

Sorry, I forgot to say, this procedure I did, was by pressing the rec button (top left of the control). Even doing this, in Windows did not work, but on MacBook yes. I waited for the download, and as it was ending, I pressed, and followed the whole process. Every time the drone restarted, I pressed it again.

minolta1034 Posted at 2018-4-18 15:26
This solution does not work for me.

Same error 0x020106

It was over a year trying, and with the hint of the rec button, and, Apple's computer, worked first. I did not believe it. I restarted the drone and made all the calibrations possible as a precaution, and went flying, everything perfect

DJI Thor Posted at 2018-4-18 20:01
I had forwarded you the beta. However, please note that if the current version of your drone is later than v1.04.0000, the beta might not work for you. If the current version is prior than that version, please refer to the steps below.
Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.

my drone is currently on 01.03.0500

I attempted to upgrade to the latest firmware using a macbook with the record button enabled. Whenever it stopped recording I turned it back on. The update still fails.

How do I see the beta? You said you sent it but I dont have an email or anything with the files? Dont see it in the dropdown on DJI assistant app?

minolta1034 Posted at 2018-4-21 12:58
my drone is currently on 01.03.0500

I attempted to upgrade to the latest firmware using a macbook with the record button enabled. Whenever it stopped recording I turned it back on. The update still fails.

You would see the beta in DJI Assistant 2 on the PC

lannes Posted at 2018-4-21 20:49
You would see the beta in DJI Assistant 2 on the PC

I do not see it.

DJI Thor Posted at 2018-4-18 20:01
I had forwarded you the beta. However, please note that if the current version of your drone is later than v1.04.0000, the beta might not work for you. If the current version is prior than that version, please refer to the steps below.
Please refer to the steps below to upgrade it via the DJI Assistant 2 again.
1. Log into your DJI account.

Still unable to see the beta software, please advise.

minolta1034 Posted at 2018-4-23 16:24
Still unable to see the beta software, please advise.

Sorry for the late reply. I had forwarded the beta once again. Please check. If you still couldn't receive it, please kindly register another DJI account just for accessing the beta. Thank you.

DJI Thor Posted at 2018-4-23 18:53
Sorry for the late reply. I had forwarded the beta once again. Please check. If you still couldn't receive it, please kindly register another DJI account just for accessing the beta. Thank you.

I have created a new account with this email:

jeff@cagerattle.com

minolta1034 Posted at 2018-4-23 22:03
I have created a new account with this email:

Got it, had forwarded the beta. Please log in this account and check on your DJI Assistant 2.

DJI Thor Posted at 2018-4-24 19:13
Got it, had forwarded the beta. Please log in this account and check on your DJI Assistant 2.

Updating to that beta version fails. I have uploaded my error logs.

minolta1034 Posted at 2018-4-24 21:13
Updating to that beta version fails. I have uploaded my error logs.

Just to verify, did you follow the steps I mentioned on 8#? Please do follow every step, or it might help. Looking forward to your update.

DJI Thor Posted at 2018-4-24 22:29
Just to verify, did you follow the steps I mentioned on 8#? Please do follow every step, or it might help. Looking forward to your update.

Attempted everything I could on PC. Holding Record, not holding Record. No good.

My MacBook is at my office so I will be trying on mac tonight.

Tried on  my macbook, both hitting record and not hitting record.

Neither worked.

minolta1034 Posted at 2018-4-25 16:09
Tried on  my macbook, both hitting record and not hitting record.

Neither worked.

Noted it. Will forward your upgrade note to the engineers to check. Please wait patiently.

minolta1034 Posted at 2018-4-25 16:09
Tried on  my macbook, both hitting record and not hitting record.

Neither worked.

Not the feedback from the engineers. It is the hardware issue which causes the failure, please kindly send the drone in for repair. Please contact our support on the following page to start a case: http://www.dji.com/support

DJI Thor Posted at 2018-4-25 22:24
Not the feedback from the engineers. It is the hardware issue which causes the failure, please kindly send the drone in for repair. Please contact our support on the following page to start a case: http://www.dji.com/support

Which account should I submit the Repair Request under? My original DJI account or the one you had me create with the beta software?

minolta1034 Posted at 2018-4-26 06:16
Which account should I submit the Repair Request under? My original DJI account or the one you had me create with the beta software?

If you use the original one more frequently, I suggest using that one. It depends on you and won't affect your repair, no worries.