Please select Into the mobile phone version | Continue to access the computer ver.
Mavic Air 2.4G/5.8G problem at CE power
765 2 2018-4-16
Uploading and Loding Picture ...(0/1)
o(^-^)o
blalo
lvl.1
Hungary
Offline

Hi,

After switch on the Mavic Air and the transmitter in auto channel select mode always selects 5.8G. The 5.8G CE power only 25mW. It is very few, the LOS range is only 100m-200m.

When I select an 2.4G channel manually, and then select auto ch mode, it stay on 2.4G ch. Until the next turn off. It is very bad behavior.
How can it stay at 2.4G at the next turn-on in auto ch select mode?
Can the 5.8G channel be disabled somehow?

Thx.
2018-4-16
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Online

Hi, in auto channel mode, it will pick the one with the best signal quality. If you are in an open field without other WiFi interference it will most certainly stick to 2.4 GHz. But if you are in a built-up area with other WiFi networks around the preferred choice will be 5.8 GHz. Thanks!
2018-4-17
Use props
ldgjGuy
lvl.4
Flight distance : 392795 ft
Netherlands
Offline

My experience is with the Auto Channel mode is that it is always on 5.8ghz, even if you are in open space without any wifi disturbance. In openspace i always select 2.4ghz, this gives the MA 2 times more range!
2018-4-17
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules