When charging the RC with the supplied cable it stops charging at 3 leds, never goes to 4. After a full charge, when checking its state of charge by pressing the power button momentarily only 3 leds light up. Litchi reports the RC charge level at 100%. All firmwares are current and the 4th led is operational (lights up when powering on). Manual gives no clues...is this normal behavior?

No,  all 4 should light up at 100%.

asaw Posted at 2018-4-29 13:53
No,  all 4 should light up at 100%.

Thank you very much for the confirmation....
In the meantime I decided to check again the led sequence when powering up.
It seems that the fourth led went bye bye...So my statement that the 4th led is operational should be amended as WAS operational.

Is there a way to do that? I only see the drones battery in DJI GO4

I can say the Spark controller stops flashing but displays 4 bars when fully charged.

Do DJI controllers default discharge at 10 days as they too use LiPo batteries?

ggeorgis Posted at 2018-4-30 13:43
Is there a way to do that? I only see the drones battery in DJI GO4

Sorry about this. Could you upload the issue video for better assistance? We'd like to look into the exact status.

DJI Susan Posted at 2018-5-7 04:14
Sorry about this. Could you upload the issue video for better assistance? We'd like to look into the exact status.

I do not have a video (yet) but I have the next best thing. A picture!!!
I also noticed that the summary displayed when pressing Fly Now does show battery level.
So as you can see at 97% only 3 leds light up.


https://drive.google.com/open?id=1JPM2QQgxb_llZXiqfLfVLFsZSNn3kw2ltw

Maybe the 4th LED is just broken?

saviour Posted at 2018-5-8 02:15
Maybe the 4th LED is just broken?

Thats what I figured....
I will wait to see whether I should send everything in or just the RC.

ggeorgis Posted at 2018-5-8 01:59
I do not have a video (yet) but I have the next best thing. A picture!!!
I also noticed that the summary displayed when pressing Fly Now does show battery level.
So as you can see at 97% only 3 leds light up.

Sorry about this. Please kindly start a case and send the RC in: https://www.dji.com/support