Please select Into the mobile phone version | Continue to access the computer ver.
M600 Pro + Zenmuse X3 Camera Limp
1470 4 2018-5-3
Uploading and Loding Picture ...(0/1)
o(^-^)o
6480
lvl.1
  • >>>
Australia
Offline

Hi Guys!

I've equipped the M600 with the Zenmuse X series Gimbal rack, after some tinkering, currently, I receive only video feed from the Zenmuse X3 Camera, I can take snapshots and start video recording from the M600 controller, nevertheless:

The gimbal does not respond to my commands and has a limping attitude, at least it stays fixed to whatever position I move it myself.

I've just upgraded both M600 Pro and Lloghtbridge firmware with the DJI Assistant.

Thanks in advance for your help and guidance on this matter.

Cheers!
2018-5-3
Use props
6480
lvl.1
  • >>>
Australia
Offline

Something I forgot to add, the Zenmuse X3 Camera comes from an Osmo+  and image transmission is upside down.
2018-5-3
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

Hi there, what is the color of your Zenmuse X3? If it is from Osmo+, it should be Zenmuse X3 Zoom and the color is black, the black camera cannot be mounted to the aircraft.
2018-5-3
Use props
6480
lvl.1
  • >>>
Australia
Offline

DJI Mindy Posted at 2018-5-3 23:11
Hi there, what is the color of your Zenmuse X3? If it is from Osmo+, it should be Zenmuse X3 Zoom and the color is black, the black camera cannot be mounted to the aircraft.

Yes, It is just as you just described it.

Thanks
2018-5-5
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

6480 Posted at 2018-5-5 04:56
Yes, It is just as you just described it.

Thanks

Well, that is the reason, the black camera cannot be mounted to the aircraft.
2018-5-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules