Seems every time I update a new GO 4, the RC stick calibration needs to be done as they are too touchy.  AFter the update, just barely moving a stick causes it to shoot up to 100%.  Happens with both the horizontal and vertical moves on left and righ sticks.  It responds smoothly after the calibration, but does seem odd that the RC sticks calibration goes off with a new GO 4 update.

Same for the left roller wheel too.  Too touchy until the calibration is performed.

Don't know what other calibrations or changes happen when GO 4 is updated.

It is recommended adjust the EXP and the Gain in Main Controller Settings properly, please have a try.