Please select Into the mobile phone version | Continue to access the computer ver.
Blue plastic glue inside wall of motors
Uploading and Loding Picture ...(0/1)
o(^-^)o
Lomvin
Flight distance : 10902 ft
  • >>>
Sweden
Offline

I hope anyone from DJI Support can confirm if this is of concern and needs to be sent in for repair.

During an inspection of my Inspire 2 I noticed different amont of blue plastic gel or glue in each motor's wall.
If this will come loose when in flight I'm certain it will create engine failure in mid air. To me it looks like some rest material from production of the motors. Perhaps needed for balancing? I've confirmed that there are more pilots out there with the same blue gel or glue inside the motors.

Until answered or repaired my AC is now grounded.

Please have a look at the attached picture of one of the motors.


Blue gel plastic

Blue gel plastic
2018-5-11
Use props
Mad_Angler1
Captain
Flight distance : 2741657 ft
  • >>>
United Kingdom
Offline

Its for balancing and is perfectly normal.
2018-5-11
Use props
DJI Elektra
DJI team
Hong Kong
Offline

Angler is right about that. It is a kind of glue which can help the motor of drone keep balance. Please keep us updated, if you find any abnormal behavior of drone.
2018-5-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules