Fitting X series base to custom drone, Just wondering what the Max voltage rating for the X5 or X3 camera/ gimbal combos

Hi, sorry for the inconvenience, you can check all the specs for the Zenmuse X5 from the website: https://www.dji.com/zenmuse-x5/info#specs.

DJI Diana Posted at 2018-6-4 00:07
Hi, sorry for the inconvenience, you can check all the specs for the Zenmuse X5 from the website: https://www.dji.com/zenmuse-x5/info#specs.

This site does not mention max operating voltage. On the Matrice 600 it uses 18v port on the Inspire the battery voltage is 22.2 but doesn't say that is what the camera voltage is. Can you tell me if it will work on direct voltage of 22.2v 6S battery system ?

DroneOz Posted at 2018-6-4 00:16
This site does not mention max operating voltage. On the Matrice 600 it uses 18v port on the Inspire the battery voltage is 22.2 but doesn't say that is what the camera voltage is. Can you tell me if it will work on direct voltage of 22.2v 6S battery system ?

Hi, this has been forwarded to our engineers for a confirm, I will let you know when there is an update from them. Appreciate your patience.

DJI Diana Posted at 2018-6-5 01:03
Hi, this has been forwarded to our engineers for a confirm, I will let you know when there is an update from them. Appreciate your patience.

Any more info yet?

HI, we Urgently need to know the minimum voltage to run an ZENMUSE X5 RAW under a custom X8 Drone. We have 48 VDC 12S system. What does the X5 Raw need (12 VDC or 18VDC or 24 VC ? ). PLEASE ADVISE.

All time I used 22v for X3 an X5 Camaras an never was problem

DJI Diana Posted at 2018-6-4 00:07
Hi, sorry for the inconvenience, you can check all the specs for the Zenmuse X5 from the website: https://www.dji.com/zenmuse-x5/info#specs.

Can the x3 be run on 6s, do we have an answer yet?

Why is it so difficult to find all the info I am looking for...so is the x5 rated for 22v 6s lipo? And if so does it power the lightbridge2?

djiuser_0uq3SIfIR2SV Posted at 12-8 21:15
Why is it so difficult to find all the info I am looking for...so is the x5 rated for 22v 6s lipo? And if so does it power the lightbridge2?

If you are using the X series mounting plate () it is designed to be used with the XT30 cable on the M600 - I have seen this port labeled 6s LiPO  but rated at 18v eg. m600 manual(https://dl.djicdn.com/downloads/ ... Manual_v1.0_EN_.pdf) page 14

Do not use 6S for The lightbridge 2; FAQ (https://www.dji.com/lightbridge-2/info#faq) states rated for 3S, however the manual  lists 12v and many in this forum say not a millivolt more