RICARDO CHEES
Second Officer
Peru
Offline
|
Hola
Primero tienes que hacer pruebas de campo para encontrar la velocidad ideal ya que ésta depende de muchos factores. Ya sea por el tipo de producto -densidad-a pulverizar (herbicida, fertilazante, insecticida, et.), el volumen de aplicación por Ha. , la cantidad de gotas por cm.2 que buscas, el tipo de boquilla a utilizar, la hora del día, la temperatura, la humedad relativa, la velocidad del viento y la deriva, la altura de vuelo escogida y de seguro uno u otro factor más. En resumen el éxito de la pulverización se traduce en la cantidad de gotas por superficie que puedas aplicar de acuerdo a los requerimientos del producto.
Abajo una escala referencial:
7.2 km/h (2 m/s)- muy lento
8 km/h (2.2 m/s) - lento
10.8 km/h (3 m/s)- promedio
18 km/h (5 m/s)- rápido
25 km/h (7 m/s)-máximo de operación (pulverizando)
43.2 km/h (12 ms)- máximo de vuelo sin carga.
Saludos
Hi there
First, you have to perform some field tests to find the ideal operation speed since it depends on many factors. Either by the type of product -density-to be sprayed (herbicide, fertilizer, insecticide, etc.), the volume of application per hectare, the number of drops per cm.2 you need to deliver, the type of nozzle to use, the time of the day , the temperature, the relative humidity, the wind speed causing product drift, the flight altitude, etc. At last, the success of the spray depends on the amount of drops per surface that you deliver according to the product specs.
Below a reference scale:
7.2 km / h (2 m / s) - very slow
8 km / h (2.2 m / s) - slow
10.8 km / h (3 m / s) - average
18 km / h (5 m / s) - fast
25 km / h (7 m / s) - maximum operation (pulverizing)
43.2 km / h (12 ms) - maximum flight without load.
Regards
|
|