Please select Into the mobile phone version | Continue to access the computer ver.
Can a DiY with DJI parts use DJI Go or GS pro?
515 1 2018-6-20
Uploading and Loding Picture ...(0/1)
o(^-^)o
kankamuso
lvl.1

Spain
Offline

Hi,


Due to professional reasons I need the functionality of matrice 100/Phantom 4 in a smaller-than-the-matrice body but still bigger than the Phantom 4. My question is, If I chose a third party frame and DJI parts (A3 controller, props, motors, etc...) will I be able to control it from the matrice 100 controller and get full DJI Go functionality? DJI Go first asks you to select the model you are flying so I suppose there must be something else I need for the model to be recognized as such...


Any hints?

Thanks in advance,

Jose


2018-6-20
Use props
djiuser_Cdbewb7B4ofD
lvl.4
Flight distance : 27142 ft
United States
Offline

Theoretically it should. The only problem I'd forsee is it having accurate calibrations. I don't know if DJI motherboards have information based on the frame stored in it. (Variable factors; weight, dimensions ECT..)
2-12 13:19
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules