Please select Into the mobile phone version | Continue to access the computer ver.
M210 + Z30 + XT2 ???
4652 13 2018-6-22
Uploading and Loding Picture ...(0/1)
o(^-^)o
ibadea
Second Officer
Flight distance : 269318 ft
Romania
Offline

Tried and I didn't manage to make it work ... and just right now I've seen on DJI M200 series page, somewhere down on the page the estimated time when using Z30 together with XT2 so it seems that DJI made this test ...

I tried and failed ... anyone down here manage to make it work?
2018-6-22
Use props
ibadea
Second Officer
Flight distance : 269318 ft
Romania
Offline

2018-6-23
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

Yes, XT2 is compatible with M210, please make sure the firmware version of M210 is v1.01.0900 or later and the XT2 is mounted to the gimbal connector I. Please let us know if the issue persists. GTScreenshot_20180625_161254.png
2018-6-25
Use props
ibadea
Second Officer
Flight distance : 269318 ft
Romania
Offline

DJI Mindy Posted at 2018-6-25 00:14
Yes, XT2 is compatible with M210, please make sure the firmware version of M210 is v1.01.0900 or later and the XT2 is mounted to the gimbal connector I. Please let us know if the issue persists.[view_image]

This is not what I asked !
I asked if XT2 can work together with a Z30 on a dual gimbal setup (M210 / M210RTK) ???
2018-6-25
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

ibadea Posted at 2018-6-25 06:58
This is not what I asked !
I asked if XT2 can work together with a Z30 on a dual gimbal setup (M210 / M210RTK) ???

I apologize if I misunderstood your post, yes, XT2 can work together with Z30 on a dual gimbal setup, no problem.
2018-6-28
Use props
ibadea
Second Officer
Flight distance : 269318 ft
United Kingdom
Offline

DJI Mindy Posted at 2018-6-28 22:06
I apologize if I misunderstood your post, yes, XT2 can work together with Z30 on a dual gimbal setup, no problem.

Can you please explain how and what firmware versions you used when it worked ? Because I tried with XT2 on port 1 and Z30 on port 2 and the other way around Z30 on port 1 and XT2 on port 2 and it didn't work ...
2018-6-28
Use props
ChiefPilot
lvl.1

United States
Offline

ibadea Posted at 2018-6-28 22:09
Can you please explain how and what firmware versions you used when it worked ? Because I tried with XT2 on port 1 and Z30 on port 2 and the other way around Z30 on port 1 and XT2 on port 2 and it didn't work ...

We are running a 210 dual gimbal setup with the Z30/XT2.  I don’t recall the latest firmware version, but our system was operating normally on the previous version as well.
To confirm, you’re using DJI Pilot and not DJI Go?  DJI Go will only support single gimbal ops.  And your placement is correct, XT2 on 1 and Z30 on 2.
2018-6-29
Use props
ChiefPilot
lvl.1

United States
Offline

ibadea Posted at 2018-6-28 22:09
Can you please explain how and what firmware versions you used when it worked ? Because I tried with XT2 on port 1 and Z30 on port 2 and the other way around Z30 on port 1 and XT2 on port 2 and it didn't work ...

We are running a 210 dual gimbal setup with the Z30/XT2.  I don’t recall the latest firmware version, but our system was operating normally on the previous version as well.
To confirm, you’re using DJI Pilot and not DJI Go?  DJI Go will only support single gimbal ops.  And your placement is correct, XT2 on 1 and Z30 on 2.
2018-6-29
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

ibadea Posted at 2018-6-28 22:09
Can you please explain how and what firmware versions you used when it worked ? Because I tried with XT2 on port 1 and Z30 on port 2 and the other way around Z30 on port 1 and XT2 on port 2 and it didn't work ...

Like I posted in 2#,  please make sure the firmware version of M210 is v1.01.0900 or later and the XT2 is mounted to the gimbal connector I and Z30 is mounted to the gimbal connector II. Just to verify, what is your current firmware version? Will the gimbal self-check after powering on? Are you using DJI Pilot?
2018-6-29
Use props
ibadea
Second Officer
Flight distance : 269318 ft
Romania
Offline

DJI Mindy Posted at 2018-6-29 22:53
Like I posted in 2#,  please make sure the firmware version of M210 is v1.01.0900 or later and the XT2 is mounted to the gimbal connector I and Z30 is mounted to the gimbal connector II. Just to verify, what is your current firmware version? Will the gimbal self-check after powering on? Are you using DJI Pilot?

Tried just now on an M210 RTK and indeed it worked OK. Quite interesting the Z30 is way way way better very low light in than the RGB camera on XT2, quite surprising I have to say ...
2018-7-1
Use props
DroneAction360
lvl.1
Flight distance : 57884 ft
Canada
Offline

we have the same issue with M210 with XT2 and Z30 camera. we tried and sometimes we have no images from the Z30 and the XT2. when we tried to put only one camera at a time we have no images at all.

firmware is 1.01.0911
all the cameras are updated

need support
2018-8-14
Use props
AntDX316
Captain
Flight distance : 3394731 ft
  • >>>
United States
Offline

DroneAction360 Posted at 2018-8-14 15:25
we have the same issue with M210 with XT2 and Z30 camera. we tried and sometimes we have no images from the Z30 and the XT2. when we tried to put only one camera at a time we have no images at all.

firmware is 1.01.0911

https://www.dslrpros.com/matrice-210-rtk-zenmuse-xt-z30.html

You have to have an XT V2.
2019-12-3
Use props
Keule
Captain
Flight distance : 3733015 ft
  • >>>
United Kingdom
Offline

AntDX316 Posted at 12-3 19:28
https://www.dslrpros.com/matrice-210-rtk-zenmuse-xt-z30.html

You have to have an XT V2.

All of the posts above refer to a XT2
2019-12-3
Use props
AntDX316
Captain
Flight distance : 3394731 ft
  • >>>
United States
Offline

Keule Posted at 12-3 23:24
All of the posts above refer to a XT2

yeah but the only way is to use an XT w/ a Z30 on an M210 w/ the latest software
2019-12-4
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules