The 4-pin attitude cable that connects the CAN 1 Port on the matrice 600 pro to an X5 gimbal mount broke.  I cant seem to find anywhere to purchase the replacement cable, any suggestions?

https://store.dji.com/product/matrice-600-series-cable-kit - Good luck

Regijean has posted the purchase link, which includes all M600 series cables except HDMI, please let us know if you have any further issue. Thank you.

Hi Mindy,

I could not see the Gimbal Attitude cable that connect Matrice 600 Pro to Zenmuse X3 gimbal in the picture. Please tell me where can I buy that.

Gautam

I am having the same issue. However, I purchased the item linked above and I can confirm that the cable is not included. The only place I have seen the correct part is at https://store.dji.com/product/ma ... g-bracket?vid=6321. However, I don't want to spend $170 for the whole kit when all I need is a $5 part.

djiuser_63Jpoym24lyZ Posted at 2018-7-16 08:45
Hi Mindy,

I could not see the Gimbal Attitude cable that connect Matrice 600 Pro to Zenmuse X3 gimbal in the picture. Please tell me where can I buy that.

Whoops - you're right, apologies!

djiuser_63Jpoym24lyZ Posted at 2018-7-16 08:45
Hi Mindy,

I could not see the Gimbal Attitude cable that connect Matrice 600 Pro to Zenmuse X3 gimbal in the picture. Please tell me where can I buy that.

One of these, maybe: https://store.dji.com/product/li ... t-v2&position=1

Regijean Posted at 2018-7-16 17:57
One of these, maybe: https://store.dji.com/product/lightbridge-2-cables?from=search-result-v2&position=1

The second from the top looks like it could be the correct part. However the image quality isn't good enough to see. Is there a parts list available for that package?

nmce Posted at 2018-7-17 05:31
The second from the top looks like it could be the correct part. However the image quality isn't good enough to see. Is there a parts list available for that package?

Hi,

I also have that Lightbridge 2 cables in my head; but I am not sure whether the second from the top is a Gimbal Attitude Cable and fits for my purpose. I would like to hear from DJI Technician before buying it. I appreciate if they can give part number of this cable.

I too need these cables. I can't get DJI support to write me back. Both the LightBridge and Attitude cables were damaged when I got them (staple from packaging pierced one), and I've spent a month trying to get a reply. They first told me to purchase the Matrice 600 Pro cable kit. They were not included. I don't want to purchase the entire Zenmuse mounting kit again. The cables in this kit look like them, too. https://store.dji.com/product/matrice-600-z15-gimbal-connector

LunarEvent Posted at 2018-7-17 06:09
I too need these cables. I can't get DJI support to write me back. Both the LightBridge and Attitude cables were damaged when I got them (staple from packaging pierced one), and I've spent a month trying to get a reply. They first told me to purchase the Matrice 600 Pro cable kit. They were not included. I don't want to purchase the entire Zenmuse mounting kit again. The cables in this kit look like them, too. https://store.dji.com/product/matrice-600-z15-gimbal-connector

I went ahead and ordered https://www.amazon.com/gp/produc ... OB7APVMLY&psc=1 from amazon. I will post if it is the correct part when I receive it.

hi guys,
I hope this doesn’t sound condescending but the wires and connectors are not special, they are connectors used in everyday electronics that can be bought at places like RS components or mouser.
there are also local electronics repair people who for some beer tokens would do a fix. with these commercial drones I feel we need to be a bit more clued up in respect of getting yourself out of the poo, by this I mean either carry every spare there is, not practical really or acquire some further knowledge as to where repairs can be done. when I don’t have the skill I find someone who has and either learn it or use them which is how I became less reliant on DJI for support and took the rains myself.  we have the internet, forums and a brain to think so why let them go dormant. Being prepared is part of the commercial pilots remit, if the drone is not working we are not getting the job done. Hope that did not offend or state the obvious.

ricci

ricci2 Posted at 2018-7-26 23:54
hi guys,
I hope this doesn’t sound condescending but the wires and connectors are not special, they are connectors used in everyday electronics that can be bought at places like RS components or mouser.
there are also local electronics repair people who for some beer tokens would do a fix. with these commercial drones I feel we need to be a bit more clued up in respect of getting yourself out of the poo, by this I mean either carry every spare there is, not practical really or acquire some further knowledge as to where repairs can be done. when I don’t have the skill I find someone who has and either learn it or use them which is how I became less reliant on DJI for support and took the rains myself.  we have the internet, forums and a brain to think so why let them go dormant. Being prepared is part of the commercial pilots remit, if the drone is not working we are not getting the job done. Hope that did not offend or state the obvious.

Hi ricci2,

I like your idea. I have been trying mouser to find a right pin head so that I may repair it myself. However, as DJI is not giving us data sheet of the cable, I am finding it difficult to get right pin heads. they are so tiny.

nmce Posted at 2018-7-17 07:08
I went ahead and ordered https://www.amazon.com/gp/product/B01EBPBCM4/ref=ox_sc_act_title_2?smid=A2YGVOB7APVMLY&psc=1 from amazon. I will post if it is the correct part when I receive it.

Hi nmce,

Did you get the cable that you ordered? Was that the right cable.