My SD card reader has failed to work    It was working fine I even tested prior to  going to vacation when I arrived at my destination I turned on my osmo and both green lights were on
I looked it up and it indicates that the SD card reader is failing   I have tried every trick I could find on the Internet to get the SD card reader to work again I have not been able to do so I have tried to update the  firmware , and push all the buttons at the same time and hold it there blah blah blah and Nothing worked  could the x-ray machine at the airport have damaged my SD card reader

Hello there. We apologize for the inconvenience. Did you try to reformat the SD card?

Multiple times

it is now a 500 dollar paperweight

Bonemaker Posted at 2018-7-19 14:16
it is now a 500 dollar paperweight

Hi, Did you try to use a different SD card?

Yes with 4 different sad card
Have reformatted the cards recalibrated the gimbal etc etc
Nothing works

Bonemaker Posted at 2018-7-19 15:02
Yes with 4 different sad card
Have reformatted the cards recalibrated the gimbal etc etc
Nothing works

I see. If that's the case, I highly suggest you send the unit to our repair center and have it check. You may start a case online: https://repair.dji.com/repair/index