Please select Into the mobile phone version | Continue to access the computer ver.
Phantom 4 Advanced Gimbal buzz noise and not horizon
Uploading and Loding Picture ...(0/1)
o(^-^)o
Kraven90
lvl.1
Indonesia
Offline

hi DJI Thor

My AC Phantom 4 Advanced

1. When starting the aircraft, the camera makes a moves as the ghimbal is warming up. The camera gets its horizontal-front possition  but after a few seconds  a noise comes out from ghimbal and it lose its position making a tilt down.The camera aim (tilt) down  a little bite (approximate 70degrees ) when it is suppossed to stay firm at 90degree (horizontaly)
2. When I fly the aircraft and I comand rotating to the left or right the camera has a tilt up and then slowly moves to the horizontal position.
3. I have tried again to auto calibrate the ghimbal but it gets stuck at 50% calibration process.
4. Brand new out of the Box, havent been fly before
5. AC Version 0128
I really need help, please!


could you send me a beta version to my email? my email : yohansenj@gmail.com


https://www.youtube.com/watch?v=LDPHCCQcWpU
2018-7-20
Use props
Kraven90
lvl.1
Indonesia
Offline

2018-7-20
Use props
fans22eebde8
New

Colombia
Offline

I’m having the same problem. I bougth my DJI Phantom 4 advance 2 months ago and its having this problem. It gets stuck on 50% when it’s calibrating the gimbal and make a buzz sound while it’s stuck. This sounds also when it starts
My mail is rppdapa@gmail.com if there is some beta to solve this problem
2019-3-3
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules