[backcolor=rgba(0, 121, 211, 0.05)]Good day all, I Did all calibrations. It did not helped. Let me elaborate more. I'm flying straight, constant altitude and yaw (not touching stick), only forward. But video from camera seems drifting, I think it should keep line, to keep my topic in frame I still need to use yaw to change slightly direction. Other example, descending, stick down, and stick forward pointing Mavic to me. Drone drifting pretty badly to my right side, where I think should descend and fly forward straight.
[backcolor=rgba(0, 121, 211, 0.05)]No idea what can be wrong, I had this bird 3 times in the air so far, weather calm, no wind.
[backcolor=rgba(0, 121, 211, 0.05)]Any help greathly appreciated.

Calibrate sticks, and cold calibrate IMU. See if it helps.

I did stick calibration, IMU was calibrated after night, so I presume Mavic was cold enough.

I've the same problem and called the support today. I need to send it to DJI for further error analysis.
What I've done:

- changed props
- calibrated IMU, Compass, RC
- reset everything to default
- downgrade FW to .300
- downgrade app to 4.2.16

I cross my fingers for a fast repair / replacement....

Sounds like gimbal drift and it seems common with MP and getting more common (MPs getting older, elastic stretching maybe)?

In my case it is not age issue, drone ist new, few times in the air. And is not camera drift. I can exactly see whole drone is driffting when poiting to me, descending and flying towards me.

Upload the logs so someone can take a look at it.

Then can see if its drifting or not and if it is, if there's RC, IMU or something else causing it.

Logs acquired from drone with Assistent application ?

Today was windy, so maybe not perfect example. But all other was calm and nice weather.

Mavic logs

Upload your flight logs here and then post the link to the results and we'll take a look.

One of the logs here

http://www.phantomhelp.com/LogViewer/5VGT2OOE07AI0E95M4XX/

http://www.phantomhelp.com/LogViewer/P420LXAMKFWQKNUD5CJ4/
http://www.phantomhelp.com/LogViewer/VO3XSHBJRZXNR6V9CWK1/

Hopefully an Admin will chime in and solve the problem for you.

I posted a similar thread which had one comment from an Admin then was deleted. The admins have declined to respond to me or give any reason for my thread being deleted.