Please select Into the mobile phone version | Continue to access the computer ver.
Firmware 99% and ???
368 13 2018-7-31
Uploading and Loding Picture ...(0/1)
o(^-^)o
gersphoto.orange
Second Officer
France
Offline

Firmware still locked at 99% ?????????

2018-7-31
Use props
DJI Wanda
Administrator

Offline

Hello there. We apologize for the inconvenience. May I know what method did you use on upgrading the firmware?
2018-7-31
Use props
gersphoto.orange
Second Officer
France
Offline

I have to downgrade the firmware beacause the last one is not good. Inspire 2 is very unstable to with the last one
When will you be abble to found an issu for this problem ?
2018-7-31
Use props
DJI Wanda
Administrator

Offline

gersphoto.orange Posted at 2018-7-31 06:36
I have to downgrade the firmware beacause the last one is not good. Inspire 2 is very unstable to with the last one
When will you be abble to found an issu for this problem ?

Did you try to refresh the firmware using DJI Assistant 2?
2018-8-1
Use props
vpierre
lvl.3

Suriname
Offline

mine too is very unstable,with a lot of bug landing gear rising and lowering and imu.
do a refresh of the firmware same issue
2018-8-1
Use props
DJI Tony
Super Moderator

Offline

vpierre Posted at 2018-8-1 10:47
mine too is very unstable,with a lot of bug landing gear rising and lowering and imu.
do a refresh of the firmware same issue

Hi, sorry for the troubles that it caused, did you manage to recalibrate the IMU and compass after using the DJI Assistant 2? When did you notice this issue?
2018-8-1
Use props
vpierre
lvl.3

Suriname
Offline

DJI Tony Posted at 2018-8-1 15:12
Hi, sorry for the troubles that it caused, did you manage to recalibrate the IMU and compass after using the DJI Assistant 2? When did you notice this issue?

yes several time, and always the same very unstable and not fly straight
2018-8-1
Use props
vpierre
lvl.3

Suriname
Offline

I notice this with the new firmware
2018-8-2
Use props
DJIJAKOB
Second Officer
Flight distance : 740574 ft
  • >>>
Norway
Offline

If the firmware update stops at 99% it is normally because the drone does not restart when update is finished. Normally when reaching 99%, the drone restarts, and then bumps up to 100%, also stating the update is finished.
2018-8-2
Use props
gersphoto.orange
Second Officer
France
Offline

Yes I recalibrate the IMU and compass after using the DJI Assistant
2018-8-2
Use props
gersphoto.orange
Second Officer
France
Offline

Please DJI can you explain us why after every new firmware it's not better than before ???????????????????
8000 euros for an Inspire 2 and I can't use it !!!!!!!!!!!!!
2018-8-2
Use props
peterprisk
lvl.1

India
Offline

if the firmware is locked for your device then you can bypass it and install it on your device and if you want to do it then you can know the steps on ms powerpoint customer service
2018-8-2
Use props
DJI Wanda
Administrator

Offline

gersphoto.orange Posted at 2018-8-2 08:45
Please DJI can you explain us why after every new firmware it's not better than before ???????????????????
8000 euros for an Inspire 2 and I can't use it !!!!!!!!!!!!!

Hello. Sorry for the late response. You may refer to this tutorial:
2018-8-7
Use props
gersphoto.orange
Second Officer
France
Offline

I saw that and did it, but I want to return to the first firmware that was better when I bought my Inspire 2
2018-8-7
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules