Hi All,

It seems that precision landing feature has been removed from Mavic 2. I was testing my Mavic 2 Pro today and I was not able to use presicion landing it was landing about 1 - 2 meters of starting point. There is also no precision landing option in settings.

DJI could you confirm why this was removed?

Thanks

David

Today, I found that Precision Landing is not in new version. I dont know, why???

Hi. Thank you for reaching DJI Forum. Upon checking to our engineers, Precision landing was removed.

That would seem to be a fairly odd feature to remove.  Especially given the sensors it requires are still there and all the previous models had it!

What a strange decision. I've always been really impressed by how good the precision landing is. I wonder what the reason for this is.

DJI Wanda Posted at 2018-8-30 07:13
Hi. Thank you for reaching DJI Forum. Upon checking to our engineers, Precision landing was removed.

Can you tell us why?

This is really shame, this machine is for sure capable of precision landing so removing it is nonsense for me.

DJI could you confirm real reason why it was removed?

Also, what's the point of the silly little landing light if it has no effect on helping with landing?

Thriller Posted at 2018-8-30 07:31
Can you tell us why?

That's we are not sure of, sir. As of now, this is just the information that we can provide. I'm sorry.

No precision landing? Wow.

DJI can  please add precision landing to mavic 2 series. It has all the necessary sensors.
It’s clear  you have unhappy customers, and by additing it I think you would really please them.
I myself don’t rely on RTH, I always fly myself. But as people have said it would be really useful in case of remote or app failure and when RTH is triggered and can’t be cancelled.

Fly
Ale

Having tested the RTH behaviour in various scenarios I can confirm that it behaves as described in the manual.

For loss of controller signal it waits a few seconds then retraces it’s route after ascending to the preset height.

Once it arrives above it’s starting point it descends to about 1.5 meters and waits.

I didn’t wait for the battery to go critical but powered up the controller, once connected it had an option to land (slide to land)

If the battery had gone critical it would have just landed on the spot it took off from or the recorded home point.

Pressing RTH causes the ircraft to ascend to the preset and fly directly to above the take off point. It then descends to 1.5m. If it determines that the surface is unsuitable it gives the option to ‘force landing’.

Not that different to the MP1.

Buzzyone Posted at 2018-8-31 08:24
Having tested the RTH behaviour in various scenarios I can confirm that it behaves as described in the manual.

For loss of controller signal it waits a few seconds then retraces it’s route after ascending to the preset height.

The question is how close is it to the original launch point?

I have been hearing 5 to 8 ft from where it took off.

Kingram Posted at 2018-8-31 11:16
I have been hearing 5 to 8 ft from where it took off.

Which is slightly above average but well within the normal GPS error radius.  You wont get better than that with GPS.

fans34c91fb6 Posted at 2018-8-31 10:17
The question is how close is it to the original launch point?

It was bang n to its original launch point.

DJI Wanda Posted at 2018-8-30 07:53
That's we are not sure of, sir. As of now, this is just the information that we can provide. I'm sorry.

That's a deal breaker for me.  I'll keep my Mavic Pro.  I will NOT be upgrading.

Mark Moonstruck Posted at 2018-9-2 07:54
That's a deal breaker for me.  I'll keep my Mavic Pro.  I will NOT be upgrading.

I fully understand you, sir. Thank you for your understanding.

DJI Wanda Posted at 2018-8-30 07:13
Hi. Thank you for reaching DJI Forum. Upon checking to our engineers, Precision landing was removed.

Smart engineers!

They are probably fixing it

I really hope it was because of time pressure for releasing Mavic 2 to market and it will be added in future.

DH_Pilot Posted at 2018-9-2 08:51
I really hope it was because of time pressure for releasing Mavic 2 to market and it will be added in future.

Maybe.  Or maybe it used the ultrasonic sensors which now dont exist.

So a new mode would require a complete recode from scratch to use the new sensors.

gnirtS Posted at 2018-9-2 09:14
Maybe.  Or maybe it used the ultrasonic sensors which now dont exist.

So a new mode would require a complete recode from scratch to use the new sensors.

It is very unlikely that precision landing was using ultrasonic sensors, I'm pretty confident it was based on bottom cameras which are in place also in MP2.

I cant see them using it either but struggling to see why this feature isnt fitted from day 1.  There has to be a reason surely..

DJI: "Let's install LED lights on the bottom of the new Mavic 2 Pro. You know, for better precision landing in low light situations etc. Oh, and at the same time, let's remove precision landing from the features! Because - who needs precision landing anyway?

One user on YouTube say now it land like an anafi, dji move on and update firmware like in Mavic Pro 1

I was planning on buying the 2Pro today and I saw this issue.  That's just stupid.  Remove a valuable feature that the previous model had despite the new model having way more sensors.  I would rely on RTH being precise.  I want to be able to launch from my dock and other places where RTH being off by a few metres makes a costly difference.  On Youtube I saw a comparison of the Mavic Pro 1 precision landing and it was dead on the exact point where it took off.  So I don't buy the crap about GPS being off.  Perhaps it used optics as well but it worked.  The Mavic 2 Pro in the comparison was off by several feet, missing the landing pad all together.  Shame on you DJI.

Spark, Mavic Pro, Platinum and Air all used optical sensors for precision landing.
GPS alone is 3-5m roughly only.

TommyGa Posted at 2018-9-2 13:38
DJI: "Let's install LED lights on the bottom of the new Mavic 2 Pro. You know, for better precision landing in low light situations etc. Oh, and at the same time, let's remove precision landing from the features! Because - who needs precision landing anyway?

No, after taking away Precision Landing they added the lights so you could see how far off it is.

This is so dumb,  just got my mavic 2 zoom a week ago and there’s no precision landing. I actually noticed several times. No setting either. Even my little spark had precision landing and it worked awesome.

Come on DJI update your app and add precision landing

Starting to wonder if the reasons for this and many other missing features is due to a limitation of the M2's hardware? Some of the missing features are pretty standard across all DJI drones. To release a dumbed down model doesn't make any sense at all.

Not a big deal to me, the only time I've used it was demonstrating to folks how it worked. Personally, I always land it myself.

FatherXmas Posted at 2018-9-4 08:26
Not a big deal to me, the only time I've used it was demonstrating to folks how it worked. Personally, I always land it myself.

Agreed, I don’t know who uses this feature seriously.  It’s good for showing off, that’s about it.

fans34c91fb6 Posted at 2018-9-3 07:01
No, after taking away Precision Landing they added the lights so you could see how far off it is.

Don't think the lights are there to detect how far off you are, but rather so no obstacle is in the way, when landing and light is low.

fans34c91fb6 Posted at 2018-9-3 07:01
No, after taking away Precision Landing they added the lights so you could see how far off it is.

I just laughed so hard I coughed up my coffee.

Oracle Miata Posted at 2018-9-4 08:36
Agreed, I don’t know who uses this feature seriously.  It’s good for showing off, that’s about it.

But no reason to remove features like that. Judging from the forum posts here and in other online groups, RC, Facebook, Youtube, etc - many are quite upset about this.
In addition to the DLog barrel distortion.
The one thing they both have in common? DJI reps said they have no plans to fix either.

any news ? a future update ?

Oracle Miata Posted at 2018-9-4 08:36
Agreed, I don’t know who uses this feature seriously.  It’s good for showing off, that’s about it.

Great as long as you actually have control of the drone.
Not so great if the RC has died, broken, crashed or a software lockup has prevented it talking to the drone.

Its also good for landing itself if the operator cant be bothered to execute the complex motor task of holding a joystick forward for 2 mins.

Never used precision landing with Mavic 1. What is a point to use it?
Is it not better to manual land? And it's will be precise 100% of time Also didn't understand why need to use RTH when you can fly manually For me RTH was like only for times when you lost signal etc.Asking because maybe I am missing something and I need to wanting this function too

Yesterday I tested my Mavic 2 Pro starting off a landing pad because of grass and dirt! At RTH it landed in the high grass about 1m off the landing pad! Overload of the gimbal was the result!
My Mavic Pro had no problems like this!
@DJI: if you integrate precision landing in Mavic 2 than it should always be activated so no tick necessary for precision landing! Or does this function use to much power off the cpu?