What version of firmware are you running in your Spark?

Item #3 Correction:
Tried 00.01.1000, went back to 01.00.0900
Should be:
Tried 01.00.1000, went back to 01.00.0900
Unfortunately editing will not allow an option change/correction.

I have no problems, yet, with the newest version.  iPhone 6S

I use version 00.701 because it is the last one that has built new knowledge and ability.
Since then, only "optimized" has been the result:
- "Nyut-nyut" take-off problem
- He does not fly straight
- RC wifi kills
- decrease in range
- Video feeding is a jerky problem
- compass, YAW, speed error

For me, none of them with 00.701.
Thanks, but do not ask for new firmware!

Jakab Gipsz Posted at 2018-8-30 11:33
I use version 00.701 because it is the last one that has built new knowledge and ability.
Since then, only "optimized" has been the result:
- "Nyut-nyut" take-off problem

Then you miss the important update of "optimized battery management" from .0900.
The issues you mention has also to do which app version and which device you are using.

Jos A Posted at 2018-8-30 22:19
Then you miss the important update of "optimized battery management" from .0900.
The issues you mention has also to do which app version and which device you are using.

And what does this mean exatly? Explain it detail!

to "optimize power supply during flight.
" DJI was unclear by how much this might extend the Spark's flight time beyond its original ~16 minutes of in-air time. there were several cases when the Spark just fell from the sky

Additionally, the firmware update offers better stability for the Spark's Palm Launch feature, improves the accuracy of controls in the QuickShot Dronie mode, and enhances the compatibility of DJI's additional remote control accessory. Users will now also be able to fully integrate the Spark with DJI Goggles.

The one that works.. LOL..

Using latest firmware on Spark and RC,, no issues, all working normal..

Jakab Gipsz Posted at 2018-8-30 11:33
I use version 00.701 because it is the last one that has built new knowledge and ability.
Since then, only "optimized" has been the result:
- "Nyut-nyut" take-off problem

Same for me.

Using latest firmware on Spark and RC
All OK

NumericEyes Posted at 2018-10-4 08:58
Using latest firmware on Spark and RC
All OK

Good to know  

Custom 0.900 with speed hack and up to date ios app version.
All ok!

Purchased Spark and remote. Spark has firmware 1.00.1000, remote - 01.00.0400. As I understand, its inconsistent. Whats better to do - downgrade spark, or upgrade remote (I read that new firmware can brick remote...)?

Sain Posted at 2018-10-5 23:56
Purchased Spark and remote. Spark has firmware 1.00.1000, remote - 01.00.0400. As I understand, its inconsistent. Whats better to do - downgrade spark, or upgrade remote (I read that new firmware can brick remote...)?
[view_image]

Well, no matter if you upgrade the one or downgrade the other...there's always a risk that it fails.
I personally never had problems updating Sparky or R/C. I'd suggest to make sure your computer is working correctly (virus scan, check for background tasks that consume lots of CPU and so on), then upgrade your R/C to 0600. You need DJI Assistant 2 software for that. R/Cs cannot be updated via your phone.
If the R/C firmware upgrade fails, you can still fly Sparky with your phone while your R/C is on DJI service.

Cheers,
Wolferl

i always use the latest version

Wolferl Posted at 2018-10-6 08:30
Well, no matter if you upgrade the one or downgrade the other...there's always a risk that it fails.
I personally never had problems updating Sparky or R/C. I'd suggest to make sure your computer is working correctly (virus scan, check for background tasks that consume lots of CPU and so on), then upgrade your R/C to 0600. You need DJI Assistant 2 software for that. R/Cs cannot be updated via your phone.
If the R/C firmware upgrade fails, you can still fly Sparky with your phone while your R/C is on DJI service.

RC cannot be updated via DJI Assistant 2.

Latest here... but 4.3.3 and iOS12 are not as stable as 4.3.2 and earlier.

i have the dji Go Version 4.2.6 for iOS
FW .400 for RC
and FW .600 for AC, everything works perfect, no lags, good Range, no compass-error..everything is working fine for me..i see no reason to do any update

Chuck101 Posted at 2018-10-6 11:12
RC cannot be updated via DJI Assistant 2.

In case if something go wrong and RC will be bricket, can it be downgraded using other software, like DUMLd0re?

Successfully updated RC to latest version. Will try to fly later...

Chuck101 Posted at 2018-10-6 11:12
RC cannot be updated via DJI Assistant 2.

You're right, I mixed something up.
Only Sparky can be updated via DJI Assisant 2, R/C only via phone, right?

Cheers & sorry for the confusion,
Wolferl

Sain Posted at 2018-10-7 03:31
Successfully updated RC to latest version. Will try to fly later...

Good to hear, keep us posted!

Cheers,
Wolferl

Sain Posted at 2018-10-5 23:56
Purchased Spark and remote. Spark has firmware 1.00.1000, remote - 01.00.0400. As I understand, its inconsistent. Whats better to do - downgrade spark, or upgrade remote (I read that new firmware can brick remote...)?
[view_image]

This snapshot indicates the current aircraft firmware is 01.00.1000.
It also indicates there is an update available.
What is the latest update version that replaces 01.00.1000?
What changes are in the new version?

Chuck101 Posted at 2018-10-20 04:31
This snapshot indicates the current aircraft firmware is 01.00.1000.
It also indicates there is an update available.
What is the latest update version that replaces 01.00.1000?

it's software bug on screenshot. Latest version 01.00.1000

Sain Posted at 2018-10-21 00:46
it's software bug on screenshot. Latest version 01.00.1000

Software bug in GO4 app version 4.3.3?

Chuck101 Posted at 2018-10-20 04:31
This snapshot indicates the current aircraft firmware is 01.00.1000.
It also indicates there is an update available.
What is the latest update version that replaces 01.00.1000?

its not a bug.. the battery has not been updated to match the .1000 firmware

the battery should be at .85 not .75....  that is your problem

the way to fix it is to re-flash .1000 to the aircraft which will update the battery.. must do it for every battery you own... as I have mentioned in the other thread

DeuceDriv3r Posted at 2018-10-21 05:03
its not a bug.. the battery has not been updated to match the .1000 firmware

the battery should be at .85 not .75....  that is your problem

with another battery v 1.00.00.85 situation was the same. Updating RC to 01.00.0600 fixed this problem