Please select Into the mobile phone version | Continue to access the computer ver.
New Mavic Pro Firmware Released(2018.09.03)
48283 162 2018-9-3
Uploading and Loding Picture ...(0/1)
o(^-^)o
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

retry and retry and retry   well i'm fed up with it , tried to download but just will not download.
2018-9-5
Use props
Hummingbird.UAV
Captain
Flight distance : 6584626 ft
  • >>>
Canada
Offline

Updated my Mavic Pro from v01.03.0514 to  v01.04.0500.  Took two attempts.  Updating was much longer than 5 minutes.  Only did the update so that I could take spherical panoramas.  Test flight went well, panorama was way over exposed though and the Go4 app crashed each time it tried to stitch the pano.
Manually stitched it in ICE.
2018-9-5
Use props
theothernt
First Officer
Flight distance : 321407 ft
Ireland
Online

Picanoc Jack Posted at 2018-9-5 09:13
retry and retry and retry   well i'm fed up with it , tried to download but just will not download.

Are you trying to update via your phone/tablet, or have you tried the DJI Assistant app on your PC/Mac?
2018-9-6
Use props
sanuk
Second Officer
Australia
Offline

No problems updating either the bird (MP) or the controller here via DJI Assistant on a Win 10 PC via USB.  Took about 15 minutes for both devices. And I'm on a SLOOOWWW Internet link.
Firmware seems problem-free so far.
2018-9-6
Use props
Kinetiscape
lvl.1
Offline

Thanks for the post
2018-9-6
Use props
Mavicmehigh
lvl.1
Flight distance : 9377 ft
Romania
Offline

It looks like i'm the only one who can't update. So i've tried updating via the android app but it failed due to rc battery dropping below 40%. I tried everything more times than i can remember, including using the dji assistant on the pc. At one point i had no firmwair in the ac, but i managed to get the 0.5 in now. The rc is still at 0.4 and it always fails to install. It downloads to 99% then says it failed.
If i check in the app or the assistant the firmware for the ac is 0.500 and rc 0.400 and it says it can't take off and needs to update the ac firmware!! I get error 200 and 201 sometimes, something about rc connection to the aircraft. I had no issuses whatsover with it, including other firmware updates. Any ideeas? I don t get an error code when failing, it just says it failed.
2018-9-6
Use props
robotfist
lvl.2
Offline

Why is Crystalsky not on this list??? It’s your own monitor!!
2018-9-6
Use props
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

theothernt Posted at 2018-9-6 04:48
Are you trying to update via your phone/tablet, or have you tried the DJI Assistant app on your PC/Mac?

no I have been trying on my laptop my controller has been successful to down load but not the mp
2018-9-6
Use props
DJI Susan
Administrator

Offline

حاتم الزغيبي Posted at 2018-9-4 04:06
Right I tried and the same mistake sorry I used the translator to connect

Thanks for getting back to us. If the issue remains after several times of firmware refresh, I'm sorry that you may consider sending the unit in for diagnosis: https://www.dji.com/support Sorry about this.
2018-9-6
Use props
DJI Susan
Administrator

Offline

Ulysses Paiva Posted at 2018-9-4 05:16
Hi, Susan!

Well, it is compatible in terms of being able to connect (via USB), but it's not a full compatibility. A lot of functions are not available using the goggles, like it doesnt show all the frame rate options (and some other settings on the software side that are already available inside Go4 app). You cant use both goggles and smartphone at the same time, you have to disconnect/unplug one to conect the other so you even dont have a button within the app to switch between them. When you disconnect the goggles, it always change the Go4 app wifi setting to 2.4Ghz (I mostly use 5.8ghz) even though its connected via USB cable. You have to first take off with the phone then unplug it, plug the goggle and only then you can use it. And some other functions not present inside the goggles which are present in the Go4 app (battery level bar with RTH estimation and others). It's not fully compatible, it only "works".

May I know what's the current aircraft firmware and Goggles firmware do you use? I'd like to forward to our engineers to check whether there are better suggestions.
2018-9-6
Use props
DJI Susan
Administrator

Offline

scottyboy12911 Posted at 2018-9-4 17:16
I just have a quick question, i had a dji pro and sold it to get the mavic 2. The one thing i am noticing is that the "follow me mode, terrain tracking, gestures control" just to name a few are not there... WHY is that DJI? will it be in a future update? If i am paying for a pro I WANT IT ALL lol- can anyone elaborate on that?

Sorry for the inconvenience. The intelligent flight modes of the drones are different, you may refer to the
consumer drones comparison: https://www.dji.com/products/compare-consumer-drones?site=brandsite&from=navI understand your frustration and will forward this to our engineers, hope they will consider it in the future.
Intelligent Flight Modes.png
2018-9-6
Use props
DJI Susan
Administrator

Offline

LeafPeeper Posted at 2018-9-5 02:31
Yes - it's the error I mentioned in this thread.   Happens with this firmware too.

https://forum.dji.com/forum.php?mod=viewthread&tid=155734&page=1#pid1447001

Received with thanks! I'll check the exact status later and keep you updated in your own post.
2018-9-6
Use props
DJI Susan
Administrator

Offline

fans1a30b3d1 Posted at 2018-9-5 07:16
5 times I have tried updating the RC - Mavic worked 1st time but RC fails every time!

working of a dedicated supreme desktop so this should be a walk in the park.

Sir, is there any error message when the RC update failed? May I have the screenshot for better assistance?
2018-9-6
Use props
DJI Susan
Administrator

Offline

Picanoc Jack Posted at 2018-9-6 17:44
no I have been trying on my laptop my controller has been successful to down load but not the mp

Hello Jack, may I know what's the current firmware of the Mavic Pro? Could you upload the screenshot of the failed update? We'd like to check the exact status and see whether it can be figured out remotely.
2018-9-6
Use props
Hatem m
Second Officer
Flight distance : 508097 ft
Saudi Arabia
Offline

DJI Susan Posted at 2018-9-6 18:45
Thanks for getting back to us. If the issue remains after several times of firmware refresh, I'm sorry that you may consider sending the unit in for diagnosis: https://www.dji.com/support Sorry about this.

I keep staying on an older version or waiting for a beta or a newer version can fix the update problem and that's my mail I could send me a beta version
h500200@gmail.com
2018-9-6
Use props
DJI Susan
Administrator

Offline

Mavicmehigh Posted at 2018-9-6 09:38
It looks like i'm the only one who can't update. So i've tried updating via the android app but it failed due to rc battery dropping below 40%. I tried everything more times than i can remember, including using the dji assistant on the pc. At one point i had no firmwair in the ac, but i managed to get the 0.5 in now. The rc is still at 0.4 and it always fails to install. It downloads to 99% then says it failed.
If i check in the app or the assistant the firmware for the ac is 0.500 and rc 0.400 and it says it can't take off and needs to update the ac firmware!! I get error 200 and 201 sometimes, something about rc connection to the aircraft. I had no issuses whatsover with it, including other firmware updates. Any ideeas? I don t get an error code when failing, it just says it failed.

Hi Mavicmehigh, please make sure the RC is fully charged, then connect the RC with DJI GO 4/DJI Assistant 2 to see whether it helps. If still no luck, please kindly export the upgrade log for better assistance, thanks so much!
Assistant 2(Windows) C: /Users/XXXXXX/AppData/Roaming/DJI Assistant 2/upgrade_log
Assistant 2(MAC): ~/Library/Application Support/DJI Assistant 2/upgrade_log
APP(IOS): Click the DJI logo on the left upper corner more than 10 times, you will see the log and copy it to us
APP(Android): dji/dji.go.v4/log/cache/up_new_all
2018-9-6
Use props
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

DJI Susan Posted at 2018-9-6 19:32
Hello Jack, may I know what's the current firmware of the Mavic Pro? Could you upload the screenshot of the failed update? We'd like to check the exact status and see whether it can be figured out remotely.

will do later on today,  already went through 3 batteries,  it says 100% but then shows failed and error but I have to go back again later on
2018-9-6
Use props
DJI Susan
Administrator

Offline

Hatem m Posted at 2018-9-6 19:34
I keep staying on an older version or waiting for a beta or a newer version can fix the update problem and that's my mail I could send me a beta version
h500200@gmail.com

Hi Hatem, do you refer to the Mavic Pro, right? May I know what's your current firmware and the error code when the firmware update failed?
2018-9-6
Use props
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

Picanoc Jack Posted at 2018-9-6 22:36
will do later on today,  already went through 3 batteries,  it says 100% but then shows failed and error but I have to go back again later on

well Susan the best I can do is tell you what is on the photo,  at the top of the screen there is a big exclamation mark and under it   Update failed.  upload Error log  V01.04.0500  and under that it shows 100% then bottom left corner  shows . undefined 0X032800 then shows note to restart the DJI device before updating the firmware
2018-9-6
Use props
Hatem m
Second Officer
Flight distance : 508097 ft
Saudi Arabia
Offline

DJI Susan Posted at 2018-9-6 23:19
Hi Hatem, do you refer to the Mavic Pro, right? May I know what's your current firmware and the error code when the firmware update failed?

The version is now 01.04.0602 and the version you want to update has 01.05.0600 and error is code 0x02a803
2018-9-6
Use props
Hatem m
Second Officer
Flight distance : 508097 ft
Saudi Arabia
Offline

The picture is too much to talk about
2018-9-6
Use props
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

trying to upgrade with the mp connected to controller I am just waiting while it's upgrading hopefully that will work,
2018-9-6
Use props
Ulysses Paiva
Second Officer
Flight distance : 541260 ft
Offline

DJI Susan Posted at 2018-9-6 18:56
May I know what's the current aircraft firmware and Goggles firmware do you use? I'd like to forward to our engineers to check whether there are better suggestions.

Hi, Susan!
The latest on all. .400 on the Mavic Air and .400 on the Goggles and already updated to .500 and everything is the same.
2018-9-7
Use props
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

Ulysses Paiva Posted at 2018-9-7 03:10
Hi, Susan!
The latest on all. .400 on the Mavic Air and .400 on the Goggles and already updated to .500 and everything is the same.

don't tell me I've been trying all this time for nothing and wasting my battery lifes
2018-9-7
Use props
Picanoc Jack
Captain
Flight distance : 4497425 ft
Canada
Offline

it finally worked, and that's after I reset the whole thing to factory, then downloaded another DJI assistant,  the next time there is an update I will feel very uncomfortable however with this being said I was looking for help since early morning, say around 2am.
2018-9-7
Use props
LeafPeeper
Second Officer
Flight distance : 229058 ft
United States
Offline

DJI Susan Posted at 2018-9-6 19:13
Received with thanks! I'll check the exact status later and keep you updated in your own post.

Thanks Susan!
2018-9-7
Use props
Jollibee86
lvl.2
Canada
Offline

I keep getting this error: undefined 0x020106 and stops at 44%. I've restarted my drone and PC countless of times. I even tried using a VPN. Uninstalled and reinstalled DJI Assitant 2 multiple times. I've tried using my phone and it gets stuck at 69% and just stops updating. I've used different batteries all at 90+%. Remote updated fine but the drone won't. Either that or it goes into an update loop where it just tries to update. Please help me fix this.
2018-9-7
Use props
fans1a45612e
Second Officer
Flight distance : 600479 ft
Offline

I make an update iPhone X with wlan and works without problems.
2018-9-8
Use props
fansa07eeadc
lvl.1

Offline

So I've been trying to update the firmware on the pro 2 for around 6 hours now! I've not even flown it yet, I've took it out of the box/charged the batteries and gone to update the FW, completely fails on my android phone. Tried on the laptop with the latest assistant 2, get to 24% and fails! Tried on the iPad mini, gets to 20% and fails. I'm extremely annoyed at this and seriously thinking about returning it for a refund. I really don't know what else to do! Any advice would be appreciated
2018-9-8
Use props
JordanM
First Officer
Offline

2018-9-8
Use props
semc
lvl.2
Flight distance : 57372 ft
Offline

My update to v01.04.0500 on usb mavic pro, first it hung at 88%, then reset and it hung at 7%, error codes both times was 0*125800.
reverted back to ver v01.04.0400 which works fine for me, update to goggles was no problem.
2018-9-9
Use props
DJI Susan
Administrator

Offline

Hatem m Posted at 2018-9-6 23:32
The version is now 01.04.0602 and the version you want to update has 01.05.0600 and error is code 0x02a803

Hatem, the previous beta is only available for the firmware before 01.04.0000. For your issue, you may try to connect with DJI Assistant 2 and refresh the firmware several times to see whether it helps. If still no luck, I'm afraid that you may consider sending the unit in, please kindly contact support@dji.com to start a case.
2018-9-9
Use props
DJI Susan
Administrator

Offline

Picanoc Jack Posted at 2018-9-7 13:49
it finally worked, and that's after I reset the whole thing to factory, then downloaded another DJI assistant,  the next time there is an update I will feel very uncomfortable however with this being said I was looking for help since early morning, say around 2am.

Hi Jack, thanks for keeping us updated. You may check the version in About page to see whether it has got the latest firmware version number. If everything is the latest, and there is no error message, you may do a short flight to test. Fly safe!
2018-9-9
Use props
DJI Susan
Administrator

Offline

Ulysses Paiva Posted at 2018-9-7 03:10
Hi, Susan!
The latest on all. .400 on the Mavic Air and .400 on the Goggles and already updated to .500 and everything is the same.

Received with thanks! All info has been forwarded to our engineers for check and analysis. We'll come back as long as there is an update.
2018-9-9
Use props
DJI Susan
Administrator

Offline

Jollibee86 Posted at 2018-9-7 23:54
I keep getting this error: undefined 0x020106 and stops at 44%. I've restarted my drone and PC countless of times. I even tried using a VPN. Uninstalled and reinstalled DJI Assitant 2 multiple times. I've tried using my phone and it gets stuck at 69% and just stops updating. I've used different batteries all at 90+%. Remote updated fine but the drone won't. Either that or it goes into an update loop where it just tries to update. Please help me fix this. [view_image]

Hello Jollibee86, may I know what's the current version of the aircraft? If it is the firmware before V01.04.0000, there is a beta firmware which may help to figure this out. If the aircraft has been updated to V01.04.0000 or later version, I'm afraid that the beta will not work, you may start a case and send it in for diagnosis, please help us confirm, thanks so much!
2018-9-9
Use props
DJI Susan
Administrator

Offline

fansa07eeadc Posted at 2018-9-8 07:51
So I've been trying to update the firmware on the pro 2 for around 6 hours now! I've not even flown it yet, I've took it out of the box/charged the batteries and gone to update the FW, completely fails on my android phone. Tried on the laptop with the latest assistant 2, get to 24% and fails! Tried on the iPad mini, gets to 20% and fails. I'm extremely annoyed at this and seriously thinking about returning it for a refund. I really don't know what else to do! Any advice would be appreciated

Sir, may I know what's the current version of the DJI Assistant 2? For Mavic 2, it is recommended to download the DJI Assistant 2 from the Mavic 2 page and check:https://www.dji.com/mavic-2/info#downloads If the issue remains, please kindly refer to 56# and export the upgrade log for analysis, thanks so much!
2018-9-9
Use props
DJI Susan
Administrator

Offline

semc Posted at 2018-9-9 04:43
My update to v01.04.0500 on usb mavic pro, first it hung at 88%, then reset and it hung at 7%, error codes both times was 0*125800.
reverted back to ver v01.04.0400 which works fine for me, update to goggles was no problem.

Hi semc, may I have the screenshot of the error code? Please kindly refer to the 56# and export the upgrade log for analysis, we'd like to check the exact status, thanks so much!
2018-9-9
Use props
Nebuchadnezzar
Captain
Flight distance : 1778514 ft
Spain
Offline

i  d update my Mavic Pro Today via Dji go 4 APP . No Problems in the update
2018-9-10
Use props
Roiko
lvl.1
Flight distance : 104396 ft
Spain
Offline

Hello all!!

I have a Mavic Pro, controlling it with a Samsung S9+. RTH configured to 50m and if RC signal is lost RTH enabled.
I upgraded it yesterday to this new firmware release from the DJi 4 GO app, without issues. After then, I went into a short flight of 300-400 meters from my home location, 80-100m high. After 6 min 30s flying without issues (no wind, sunny day...) I completelly lost connection from RC to the AC. I tried to point it, get a better (higher) location... it was completely impossible to recover it. I was expecting it to do RTH, but nothing happened. After 3 minutes I decided to restart RC, and inmediately it recovered the connection and AC started RTH, landing safely.

I wonder what could happened and why AC didn´t start RTH inmediately when losing RC connection. I have rechecked configuration and everything is properly set... I never found any issue like this before, so my gut feeling was something related to this new FW.

Does anyone from DJI has any possible explanation/suggestion to avoid this behaviour? Any extra before flight check to be done? I really felt I had lost my drone...
Regards!
2018-9-10
Use props
semc
lvl.2
Flight distance : 57372 ft
Offline

I finally got the update to work with my Samsung s7 connected, the pc version kept hanging, can I have google maps instead of that other rubbish.
2018-9-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules