I purchased the newer  Phantom 4 Pro v2.0 and can't get the standard Goggles link to the drone. I have  the most up to date firmware installed and the goggles work fine with my Mavic  Platinum Pro.

I see somewhere that maybe it's because the firmware hasn't  been updated yet to accommodate the standard goggles. I understand that the RC  version of goggles work. Can someone please let me know it this is the case and  when DJI expects to get these standard goggles updated to connect with the P4P  v.2.0. Thanks for any comments.

I had exactly the same problem.

I had exactly the same problem.

I had exactly the same problem.

What's up with this system. Why doesn't it accept carriage returns?

I had exactly the same problem.

I was using the most recent goggle firmware V01.04.0500.

By downgrading to V01.04.0400 I got it working.

I don't know what DJI is up to. Technical support don't appear to know what's gong on either.

godot Posted at 2018-9-27 16:32
I had exactly the same problem.

I was using the most recent goggle firmware V01.04.0500.

Thanks I'll give that a try.

godot Posted at 2018-9-27 16:32
I had exactly the same problem.

I was using the most recent goggle firmware V01.04.0500.

Downgraded and everything works now. Thanks for the tip. Problem solved.

Jamesd9754 Posted at 2018-10-4 02:33
Downgraded and everything works now. Thanks for the tip. Problem solved.

I had the exact same problem and was up-to-date with the .500 firmware. Goggles would not link with my P4PRO+ 2.0. After many unsuccessful attemps to do everything with DJI tech support, they asked for me to send in both units. This was just a few days ago, then V01.00.2000 firmware came out with updates to occusync 2.0 and guess what. My goggles now link up just fine with the goggles at .500 firmware.

n55w132 Posted at 2018-10-9 08:43
I had the exact same problem and was up-to-date with the .500 firmware. Goggles would not link with my P4PRO+ 2.0. After many unsuccessful attemps to do everything with DJI tech support, they asked for me to send in both units. This was just a few days ago, then V01.00.2000 firmware came out with updates to occusync 2.0 and guess what. My goggles now link up just fine with the goggles at .500 firmware.

Thanks for this update. I just did the updates to drone, controller and goggles and all is well again. Thanks again.

Jamesd9754 Posted at 2018-10-9 10:20
Thanks for this update. I just did the updates to drone, controller and goggles and all is well again. Thanks again.

Your welcome. I did notice quite a bit of reduced range while using the goggles, pixelation and weak signal at about 1500 ft so I turned down the video resolution to 720p and I can now go twice that. I think the bit rate is reduced to 2 -3 mbps with that setting and seems to help with range.

n55w132 Posted at 2018-10-9 19:17
Your welcome. I did notice quite a bit of reduced range while using the goggles, pixelation and weak signal at about 1500 ft so I turned down the video resolution to 720p and I can now go twice that. I think the bit rate is reduced to 2 -3 mbps with that setting and seems to help with range.

OK Thanks. Won't be testing this out for range anytime soon until the windy weather subsides.