Please select Into the mobile phone version | Continue to access the computer ver.
X5S wont respond to slave RC joysticks
304 2 2018-9-20
Uploading and Loding Picture ...(0/1)
o(^-^)o
Joaco 75
lvl.1
  • >>>
Argentina
Offline

I´m having a problem with the dual controller setup on the inspire 2 with the X5S+ Lumix G14-42. The Master RC (the one that comes with the Inspire 2) is working fine and so is the slave RC (Cendence) as far as it comes to controlling aperture, shutter speed, ISO, AF and even record. However, the joysticks are not controlling the gimball and are completely unresponsive even when confirming I have gained control of the gimball. Anyone else with the same or similar problem? Please help!
2018-9-20
Use props
Flo the Pirate
Second Officer
Austria
Offline

you need to hand over gimbal control to the slave controller - on the main screen of dji go4app on the left side there is a gimbal icon , press that on the cendence  .... and choose free mode
2018-9-21
Use props
Joaco 75
lvl.1
  • >>>
Argentina
Offline

SOLUTION FOUND:
In the slave RC (Cendence) STICK MODE as default made it work vs custom (unprogrammed) which was unresponsive.
THANKS
2018-9-21
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules