Please select Into the mobile phone version | Continue to access the computer ver.
Tablet Holder Specs Question
307 4 2018-9-21
Uploading and Loding Picture ...(0/1)
o(^-^)o
Yraegel
Captain
Flight distance : 1317762 ft
United States
Offline

I'm looking at the Mavic/Spark Remote Controller Tablet Holder.

https://store.dji.com/product/ma ... oller-tablet-holder

Can anyone confirm if the specified dimension is diagonal or length? I have a 6th gen iPad (not pro). It's 9 1/4 inches long, 6 1/4 inches wide, 11 inches diagonallly. Want to ensure it will fit whenever it's back in stiock.


"The base can be mounted on the Mavic 2 remote controller's Mobile Device  Holder. The spring clamp at the top can hold 7-10 inch tablets."

2018-9-21
Use props
dronist
Captain
United States
Offline

So far I used it with the MINI4 and it was a tight squeeze.
2018-9-21
Use props
Yraegel
Captain
Flight distance : 1317762 ft
United States
Offline

dronist Posted at 2018-9-21 19:27
So far I used it with the MINI4 and it was a tight squeeze.

Hm, not good. Thanks!
2018-9-22
Use props
dronist
Captain
United States
Offline

Yraegel Posted at 2018-9-22 08:53
Hm, not good. Thanks!

Ur welcome Dude!
2018-9-22
Use props
DJI Stephen
Super Moderator

Offline

Hi there, thank you for reaching out. As stated on the website and from your post the clamp can hold from 7inches up to 10inch table meaning if you having the 6 1/4 inches wide it should be work then.
2018-9-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules