Hello guys

I am tired of the frequent follow-up of the traders of those materials to cover the plane and the mail and delivery and delivery prices and prices and all those problems

So I decided to do the work myself and distribute it free on all pilots

I bought the cutting machine and the necessary materials and started work two months ago, Of course, this is not my profession, but it is my hobby

I worked hard and tried to cover my DJI Mavic Pro / Mavic 2 Pro. I almost say I've managed 95% wrap

I will try to upload the Wrap file wrap for Mavic Pro and Mavic 2 Pro here in this forum in a separate topic.

I want all of you to share with me opinions, comments, admiration or dislike

Based on your feedback, I will post the file here. Remember more likes, is more enthusiastic

Note: The file will be FREE with explanation and with rights reserved for non-trading and selling

I apologize for my bad English

Greetings

Dr.osamA

Hi, thanks for reaching DJI Forum. We do appreciate sharing your skills and these photos. Have a safe flight always.

Nice looking work you did on the Skins.
If you do post the file here will it include where to get the material necessary to create the skin?
Will we need a special cutting tool?

Thanks for sharing. I can see where you put a lot of time and hard work into designing the skin template.

DJI Gamora Posted at 2018-9-30 07:33
Hi, thanks for reaching DJI Forum. We do appreciate sharing your skills and these photos. Have a safe flight always.

Thank you, sir
This is my pleasure
No for monopoly

I really like the blue on the Mavic Pro and also the one below that for the M2P, Great Work

B1houdini Posted at 2018-9-30 07:53
Nice looking work you did on the Skins.
If you do post the file here will it include where to get the material necessary to create the skin?
Will we need a special cutting tool?

Yes, of course, all the details and materials and where to buy each article and how to modify the file

Suren Posted at 2018-9-30 07:53
I really like the blue on the Mavic Pro and also the one below that for the M2P, Great Work

Did you like the blue one?
I see that you have Mavic Pro.
I can send the skin to you as a gift but you pay the shipping costs

Dr.osamA Posted at 2018-9-30 09:43
Did you like the blue one?
I see that you have Mavic Pro.
I can send the skin to you as a gift but you pay the shipping costs

That would be fantastic, thanks

Suren Posted at 2018-9-30 09:47
That would be fantastic, thanks

Ok, send me you address  plz via PM

Skins you did are beautiful. Good job

Dr.osamA Posted at 2018-9-30 09:37
Yes, of course, all the details and materials and where to buy each article and how to modify the file

[view_image]

Dr.osamA,
Will you be posting the skin files soon?

Very well done, thank you!

Thriller Posted at 2018-9-30 11:07
Skins you did are beautiful. Good job

Tank you bro

Wachtberger Posted at 2018-9-30 11:22
Very well done, thank you!

U are welcome bro

El Diablo Posted at 2018-9-30 11:14
Great job! I wouldn’t wrap the ‘belly of the beast’, it gets pretty hot so that will not help with heat dissipation (although it seems that it is not an active part of the cooling system like on the original MP)

A good note, my friend, but as you said, it is not part of the cooling system, but the Japanese have wrapped it in their latest packaging.
Moreover the user can choose to use this part or not

Dr.osamA Posted at 2018-9-30 09:52
Ok, send me you address  plz via PM

[view_image]

Great skins, every picture gets better. Well done!

B1houdini Posted at 2018-9-30 11:15
Dr.osamA,
Will you be posting the skin files soon?

I almost finished working on them and tried to try them out and check the possible mistakes and overcome them this may take a couple of days.
I was waiting for the members to share their views

Great skins, really well done. A mat black skin would look great.

M2Wair Posted at 2018-9-30 11:59
Great skins, really well done. A mat black skin would look great.

Thank you bro but there is no  mat black skin

El Diablo Posted at 2018-9-30 16:18
My wrap also came with a part for the bottom and although many other companies also do so I doubt they had enough testing done to check the long term impact of it. The vents that you’ve showed are part of the passive and active cooling system, dissipating the hit via the little fan and the natural air flow. However, they do not avoid the increase in temperatures produced by the additional thermo-insulation of the vinyl layer. Personally I believe the thermostat will activate sooner and the fan will kick-in for longer, therefore I opt (as you also mentioned) not to cover it, not to mention the impact on the lifespan of thermal paste, capacitors, etc. as I said, that thing gets hot...

You may be right to some extent, anyway it is a personal freedom to cover this place.
Thanks for the note

El Diablo Posted at 2018-9-30 16:18
My wrap also came with a part for the bottom and although many other companies also do so I doubt they had enough testing done to check the long term impact of it. The vents that you’ve showed are part of the passive and active cooling system, dissipating the hit via the little fan and the natural air flow. However, they do not avoid the increase in temperatures produced by the additional thermo-insulation of the vinyl layer. Personally I believe the thermostat will activate sooner and the fan will kick-in for longer, therefore I opt (as you also mentioned) not to cover it, not to mention the impact on the lifespan of thermal paste, capacitors, etc. as I said, that thing gets hot...

Agreed. My M2P gets so freaking hot that the fans run full speed even when it's sitting on my desk and I'm downloading files via the USB-c cable. In fact, I can only count on one hand how many times I haven't heard the fans running at max.

Great Skin...The midnight blue/glittery (what ever that color is) looks nice.

Nice work, good job

Excellent work Dr.osamA and also thanks for the thermal photo El Diablo  - Useful info

Man they are the exact copy of Wrapgrade skin
Do you have any of their permission?
It may cause legal problem if you don't

Dr.osamA Posted at 2018-9-30 11:44
A good note, my friend, but as you said, it is not part of the cooling system, but the Japanese have wrapped it in their latest packaging.
Moreover the user can choose to use this part or not

Thank you for doing this! When you release the file can we take it to a local wrap shop and have them produce it on the colors we want or does it not work like that? TIA
I would like to have the Mavic Pro file please.

Beautiful skins. You are a good man for sharing them. Well done.

Ricky Wu Posted at 2018-10-1 03:34
Man they are the exact copy of Wrapgrade skin
Do you have any of their permission?
It may cause legal problem if you don't

No, my friend, I do not need permission from anyone They are full of my work I do not have any convergence of their files Moreover it is not a secret or difficult only needs a little patience
Greetings

rolling56 Posted at 2018-10-1 03:42
Thank you for doing this!  When you release the file can we take it to a local wrap shop and have them produce it on the colors we want or does it not work like that? TIA
I would like to have the Mavic Pro file please.

Yes, this is correct, so it works
Greetings

Charissa Posted at 2018-10-1 04:03
Beautiful skins. You are a good man for sharing them. Well done.

you are welcome bro

Dr.osamA Posted at 2018-10-3 14:52
Yes, this is correct, so it works
Greetings

Well sir whenever you are ready to release let me know and thank you once again!

Dr.osamA Posted at 2018-10-3 14:51
No, my friend, I do not need permission from anyone They are full of my work I do not have any convergence of their files Moreover it is not a secret or difficult only needs a little patience
Greetings

Awesome work!  Thanks for sharing these.  I look forward to trying one out.

Done

https://forum.dji.com/thread-168640-1-1.html

Thank you so much! Never been to a wrap store but i will be going to one now

Go ahead

Cool skins