Phantom 4 Pro v2.0 previously functioning perfectly, no crashes, no recent upgrades
Upon start all four status LED's on the aircraft are solid red
RC status LED is green, DJI GO 4 shows "connected" and "go fly" but when entering the flight camera screen I am abloe to see a video feed but the status bar says aircraft disconnected
Tried re-flashing firmware through iOS and DJI Assistant on PC. Firmware refresh fails on both devices (at 90% on iOS and at 24% on DJI Assistant). On DJI assistant it says "battery error" however this occurs when I try with any of my 3 batteries
Hi Aardvark, thanks for the reply! I have tried re-linking and it doesn't resolve my issue. The status light on the RC is solid green indicating a proper connection
Hunter Cole Posted at 2018-10-23 16:47
Hi Aardvark, thanks for the reply! I have tried re-linking and it doesn't resolve my issue. The status light on the RC is solid green indicating a proper connection
If you have 4 red indicator lights on the phantom its means a hardware issue. I would check the motors first, do they all still operate normally?
Tried re-flashing firmware through iOS and DJI Assistant on PC. Firmware refresh fails on both devices (at 90% on iOS and at 24% on DJI Assistant). On DJI assistant it says "battery error" however this occurs when I try with any of my 3 batteries
I have an older P4P+ and I'm having the same issue except my 2 rear light start off blinking green and turns to solid red in flight. Controls seem to operate properly.
I don't suppose you ever found an actual answer to this, have you? I'm having the same exact problem and I have even changed out the RC that came with the drone, to a back up RC. Linking and everything else works just fine.