Is Ocusync compatible with the FrSky Horus X10S Transmitter?

No, OcuSync is a DJI proprietary protocol and only DJI equipment is comatible.

I was talking about the Ocusync Air System.  DJI documentation says, "Supported flight controllers: KISS, F3, F4, and Naze Supported remote controllers: X9D (FrSky), DEVO 10 (Walkera), T8FG (Futaba), T14SG (Futaba), WTF09sll (WFLY), and AT9S (RadioLink)."  Since it is compatible with the X9D and the X10S only came out Sept 2017, I was hoping they had not updated their documentation and that it was compatible.

Hi there, we're sorry that FrSky Horus X10S Transmitter is not compatible with DJI Ocusync Air System for now. If there is an update, we'll release on our website at the first time. Thanks for your support and attention.

Keule Posted at 2018-10-26 19:44
No, OcuSync is a DJI proprietary protocol and only DJI equipment is comatible.

Hi Keule, thank you so much for heading up. DJI Ocusync is compatible with a series of Remote Controllers, you may find it in the user manual: https://dl.djicdn.com/downloads/DJI+Goggles/20180825/DJI_Goggles_RE_User_Manual_EN.pdf  We'll release on our website if there is an update.

fansed029a49 Posted at 2018-10-27 00:57
I was talking about the Ocusync Air System.  DJI documentation says, "Supported flight controllers: KISS, F3, F4, and Naze Supported remote controllers: X9D (FrSky), DEVO 10 (Walkera), T8FG (Futaba), T14SG (Futaba), WTF09sll (WFLY), and AT9S (RadioLink)."  Since it is compatible with the X9D and the X10S only came out Sept 2017, I was hoping they had not updated their documentation and that it was compatible.

I see, i thoght your post was about OcuSync in general.