Please select Into the mobile phone version | Continue to access the computer ver.
Firmware failed
Uploading and Loding Picture ...(0/1)
o(^-^)o
Foto-Heide
lvl.1

Germany
Offline

Hello,

i become my Phantom 3 Pro today and first think i do was load the Batterys.

When Batterys are full i like to do the newest firmware update (P3X_FW_V01.01.0009).
I extract the .bin file at the SD-Card and turn Power on. The Phantom 3 was flashing but not start the update.
Ok, i turn power off and then power on - Phantom 3 makes the Camera check an then sounds loud B.B.B.B.B.B.B.B.B.B.B.B.B......... no lights only the beep.
I delete the .bin file from SD-Card but the same, after Camera check only beep..beep..beep......
Whats wrong, can i reset the Phantom 3?

2015-6-2
Use props
PhantomHelp.com
Captain
Flight distance : 228255 ft
  • >>>
United States
Offline

Try reinstalling the firmware like this:



If that fails, then run through these steps:
http://www.rcgroups.com/forums/showthread.php?t=2420104





www.PhantomHelp.com
Find the latest must-haves, fixes, mods, how-tos, guides, and accessories for your Phantom.
Phantoms in stock and ready to ship worldwide! (see availability)
2015-6-2
Use props
Foto-Heide
lvl.1

Germany
Offline

Thank you very much.

Have new installed and it works. First Flight was great!!!
2015-6-3
Use props
doanvieth
lvl.3
Flight distance : 201654 ft
  • >>>
Vietnam
Offline

My drone is DJI Phantom 3 Pro.
I have the same problem after updated the firmware P3X_FW_V01.01.0009.
Now it still have messege MC error.
When I calibrated IMU, I saying " Unknow  error"
any Idea? Thanks
2015-6-3
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules