1981manu
lvl.1
Japan
Offline
|
Hello everyone,
I'm stuck with fews problems with my drone. And after going through hours of forum, tutorial, etc.. couldn't find any solution. I have some work coming up really soon and still cant figure out any solutions.
Here is my actual setup:
-Inspire 2 FM : 01.02.0100
-X4S
-Crystal sky 7.25 V2.6.6.0
-DJI go 4 v4.2.16
Here is my problem:
1- In Video mode, with any camera settings Auto / A / S / M, I'm not able to change the aperture. In Manual, i can slide the button between 2.8-11 but when i releasing the slide it comes back to 5.6. Also on the top of screen info bar show F 1. Even sometines changing the different settings mode doesnt work and come back to auto. It's really buggy.
When I go in Photo mode every settings seems to work, aperture too..
I tried to change software version, firmware, industrial reset, nothing change my problem....
2- After 2 flight, i went far for an other shooting. And took off, what was my surprise when it appears the gimbal was stuck in one direction.
So i tried different mode follow / Free and here whats happens,
+ In follow
The camera stay straight forward with the drone (normal) but i couldnt yaw anymore my drone. It start a lit bittle to yaw and then back to the center. Like invisible forces blocked it to yaw.
+ In free
The camera stay stuck in one direction but i can yaw the drone, but then the camera doesnt follow... i ahd to recenter all the time or hold C1 to pan.
On my first flights, I used to have the camera straight forward, and to pan, I used the drone to Yaw. As i m for now alone to fly.
No i cant do that anymore.
Thank you for your time. Hope i can have answers.!
Best,
|
|