Please select Into the mobile phone version | Continue to access the computer ver.
Firmware upgrade issue for controller
349 0 2018-11-20
Uploading and Loding Picture ...(0/1)
o(^-^)o
savagemic
lvl.2
Flight distance : 272523 ft
United States
Offline

Yesterday we performed the latest updates to the 210, Cendence controller, crystal sky, pilot app and the model gl6d10a controller.

Everything went well on the 210, Cendence controller, crystal sky and pilot app.

I ran into and issue with the Model GL6D10A controller when upgrading it’s firmware it would get to about 30-40% and the controller would power off and you could not get the controller to power back on. Holding the C1+C2+Record then powering on would power it on (I’m not sure what mode this put the controller in but it wasn’t a normal power on) after several more failures to upgrade firmware I plugged the controller into power and the firmware upgrades were successful.

Keep in mind all of the batteries will also need firmware upgrades. I couldn’t find any information to help me with this at the time so I wanted to post about it for anyone else experiencing this issue.

Hope this helps someone.
2018-11-20
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules