Does any one know if the new D-RTK 2 High Precision GNSS Mobile Station has ability to connect with the M210 RTK

My first impression is that no, it will not be compatible. The only platforms listed on the product page are the MG-1P and the Phantom 4 RTK. Looking at those 2 platforms, they appear to have larger RTK components mounted on them, which the M210 RTK will not have.

Whether or not you will you able to purchase just the aerial unit and mount it yourself on the M210 still remains to be seen.

DRTK2 does not work with the M200 series. Another type of d-link. Also other intended use of the equipment.

Droning.CG Posted at 11-27 14:43
DRTK2 does not work with the M200 series. Another type of d-link. Also other intended use of the equipment.

I am not impressed with DJI about this.  The M210 was sold as a RTK unit and from my tests its not a true RTK system.

fanscc065287 Posted at 11-28 09:42
I am not impressed with DJI about this.  The M210 was sold as a RTK unit and from my tests its not a true RTK system.

Of course NOT, the RTK M210 is only used to determine the position of the drone. Subsequent DJI updates have supported this situation. PIX4D has adapted the drone for geodetic tasks, I am not sure whether the M210 will enter correct geotag tags in the photos. I want to wait for the M200 series to become a real Enterpreis without compromise.

D-RTK2 is not compatible with the M210-RTK. M210-RTK is only for UAV positioning and even then it does not write that RTK position from the base station to the UAV to the Photos. So you get centimeter level positioning that can be broadcast to up to 32 units, but not to your photos. They use UAV's onboard GPS position to stamp to photos.
Why couldn't the M210-RTK be made to work (upgrades) with the D-RTK2 and networked with a CORS for true RTK ???
If a Phantom 4 can be made to output / utilize true RTK would not one assume the more exact positioning information of the M210-RTK would be less of a leap for true Network corrected RTK?